Blinkers and flashers Not working

[xdeadeye1]

Ok recently  (before my crank Pully issue)   I had replaced the Heater core in my 96 legacy wagon , 2.2

 

Everything works but the emergency flashers and the turn signals. 

 

The lights on the the left lever work,, but when I use the lever as a turn signal,, it don't work. 

 

same with the 4 way flashers,,   Nothing...

 

I know I had the dash out,,   but if I messed something up,, I really don't know what I did.

 

Any help in fixing this would be appreciated.  IM an electrical moron.

 

Thanks.

[lmdew]

Did you plug the emergency flasher button back in when you installed the vent panel?

 

Most likely that's it.

[xdeadeye1]

I thought I did.      would that effect the turn signals too?  

 

I cann pull that vent panel and check it.. but if its plugged in ,, then what?

[xdeadeye1]

I thought I did.      would that effect the turn signals too?  

 

I cann pull that vent panel and check it.. but if its plugged in ,, then what?

[lmdew]

Yes the turn signals go through the emergency switch.

[xdeadeye1]

Thanks lmdew,,  that was indeed the problem,, forgot to plug in the emergency flasher under the front panel.. All is well.

[lmdew]

Glad you got it!  Just hit the USMB EASY BUTTON