nick1208 Posted April 30, 2015 Share Posted April 30, 2015 Looking so good 1 Link to comment Share on other sites More sharing options...
Nico Posted May 20, 2015 Author Share Posted May 20, 2015 Insta-gram has more my updates on my subarus https://instagram.com/pinocchio_ok/ 5 Link to comment Share on other sites More sharing options...
KiwiGL Posted June 6, 2015 Share Posted June 6, 2015 Looks mint and brings back memories! I've seen a few like this around back in the day, JDM imports with all the options. None lowered though! 1 Link to comment Share on other sites More sharing options...
Nico Posted June 24, 2015 Author Share Posted June 24, 2015 (edited) Looks mint and brings back memories! I've seen a few like this around back in the day, JDM imports with all the options. None lowered though!wish i could get it lower but wont go... wait till winter comes you should see how high i can lift it lol... Well since I have a ton of subaru parts collecting dust and rust lol... ill use what I have accumulated over the years to make something simple and fun as my daily driver.. EJ22T block rebuilt all stock EJ20k DOHC heads with EZ30 shimless buckets S204 Oil cooler V8-V9 twin scroll turbo Vipec/link plug in ecu 91 Turbo Legacy 5mt wiring hole thing front to back Stock 91 Turbo Legacy 5mt 3.900 V8 STi rear R180 3.900 diff XT6 Oem radiator Spal fans should be fairly light and with a good power band pretty quick daily driver.. first think on order is clean the EJ20k heads then off to the machine shop for a CNC clover less chamber. Edited June 24, 2015 by Nico 4 Link to comment Share on other sites More sharing options...
nick1208 Posted July 8, 2015 Share Posted July 8, 2015 oh dear lord.... Link to comment Share on other sites More sharing options...
Nico Posted September 17, 2015 Author Share Posted September 17, 2015 so i decided to cheat and I got a JDM WRX NB editon swap with a 5mt 4.444 r160 with AVCS heads i swapped out the intake manifold with a spare V8 STi and intercooler that i had kicking around she fits like a glove and will have A/C all most done now ready to bring it to my buddy Nam at NVauto for a nice clean stock ecu wiring job so it runs for a very long time all most looks oem lol 4 Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted September 18, 2015 Share Posted September 18, 2015 It really looks Beyond awesome, pretty clean retrofitting, and is Awesome that you'll keep the A/C. It is interesting to see two pairs of Subaru Original Halogens there. Kind Regards. 1 Link to comment Share on other sites More sharing options...
KiwiGL Posted September 18, 2015 Share Posted September 18, 2015 Love it. Should have come from the factory like that. 1 Link to comment Share on other sites More sharing options...
nick1208 Posted September 21, 2015 Share Posted September 21, 2015 so once you finish building all my dream cars I get to keep them right? 1 Link to comment Share on other sites More sharing options...
coylethebarbarian Posted September 21, 2015 Share Posted September 21, 2015 wow... Extremely Nice work! I agree, the retrofitting looks clean and spot on! And all of those parts straight outta Japan! Arrrgh!Can't wait to see more! 1 Link to comment Share on other sites More sharing options...
Bantum Posted September 21, 2015 Share Posted September 21, 2015 (edited) Just needs a 'letter box' now ... Keep at it. Ciao, Bantum ... Edited September 21, 2015 by Bantum 1 Link to comment Share on other sites More sharing options...
Nico Posted November 12, 2015 Author Share Posted November 12, 2015 It really looks Beyond awesome, pretty clean retrofitting, and is Awesome that you'll keep the A/C. It is interesting to see two pairs of Subaru Original Halogens there. Kind Regards. i cant wait to have them all running and its in a blizzard winter storm Love it. Should have come from the factory like that. i know thats how i feel after the first one, this one will be simple but lots of fun so once you finish building all my dream cars I get to keep them right? hahaha wish i could do that with other stuff lol wow... Extremely Nice work! I agree, the retrofitting looks clean and spot on! And all of those parts straight outta Japan! Arrrgh! Can't wait to see more! thank you all most done now wiring wiring wiring vrooommm Just needs a 'letter box' now ... Keep at it. Ciao, Bantum ... LOL its in the mail, tried to go stock but that hump in the hood is a pain in the butt ! so i found one that will work ok i think NEW instagram.... big_bad_wolf_xo https://www.instagram.com/big_bad_wolf_xo/ A/C in, XT6 radiator in, Clamps on, Fluid in... wiring time ! vacuum line adaptor all stock for the heater controls stock part, for the old school swapping guys lol NVAUTO wiring harness built from the JDM wiring for my car.. AVSC JDM NBR WRX open source OBD2 ECU... stock on stock on stock !! like my white Leone Coast Fab SS Race muffler to give it that pureeeeeee.. stock cats after turbo but up pipe delete of course lol 3 Link to comment Share on other sites More sharing options...
Nico Posted November 24, 2015 Author Share Posted November 24, 2015 NVauto JDM WRX NB-R V7 V8 V9 STi wiring harness all complete ready to be added in the mighty LEONE SUPER Wagon ! 2 Link to comment Share on other sites More sharing options...
Nico Posted December 20, 2015 Author Share Posted December 20, 2015 so here is my new ECU in place and super clean job from my buddy Nam at NVauto and of course I have OBD 2 now lol.. simple easy spot to put it in all most looks factory dont want to but if i want to cool the intercooler something has to give.. maybe maybe front mount the top mount so it looks stealth out on the street.. so after getting all the wires and the car running last is the exhust set up.. here we have the oval 3" tube so it dosent scrap and then to the CoastFab muffler all is 304 SS tig welded at NVauto so old school Subaru had the oil pressure on the dash, so I really wanted to get it to work so I have a gauge in the car.. after try many different ways I said F it off to the machine shop to cut this pipe thread down to the proper oil plug size.. top is original part bottom is after, fits like a glove and works perfect in the dash now 2 Link to comment Share on other sites More sharing options...
Nico Posted December 20, 2015 Author Share Posted December 20, 2015 so after getting the car all done I had a problem with my R160 WRX 4.444 axles popping out the diff because there to short.. had to raise the rear and not drive around corners so fast to keep the axles in place.. so after building my other Leone with the V9 STi 6mt and R180 3.900 diff and having no problems at all.. I decide the only way to make this work easy is to find the most rarest diff Subaru made R180 4.444 = GC8 22B or TypeRA-R GC8. some how some way the local JDM shops in Canada had one on had that no body wanted 22B R180 4.444 mechanical Monster ! also got my anttic rims 4x140 machine hub rings so no more shakes at 100kms and beyond 2 Link to comment Share on other sites More sharing options...
subnz Posted December 20, 2015 Share Posted December 20, 2015 (edited) Nice work this was my one in 2009 before it moved on NZDM 86 Leone GF ea82 5MT D/R Touring Wagon Edited December 20, 2015 by subnz 1 Link to comment Share on other sites More sharing options...
Nico Posted December 20, 2015 Author Share Posted December 20, 2015 Video of how quick 4.444 with 13"inch rims is lol 1 Link to comment Share on other sites More sharing options...
nick1208 Posted December 20, 2015 Share Posted December 20, 2015 Link to comment Share on other sites More sharing options...
KiwiGL Posted January 5, 2016 Share Posted January 5, 2016 Nice work this was my one in 2009 before it moved on NZDM 86 Leone GF ea82 5MT D/R Touring Wagon Not to clog up Nico's thread (insanely fast btw) but that's almost identical to mine minus the H-type wheels and red TURBO decal on rear doors! Mine was an N-reg 1987 GTX turbo with the 3-speed auto and switchable 4wd. No centre diff so FWD on tarmac. Torque steer was crazy! The paint on mine was wrecked too, that blue didn't age well and I think it contributed to the terminal firewall rust in mine. Link to comment Share on other sites More sharing options...
Loyale Lover Posted January 6, 2016 Share Posted January 6, 2016 Fantastic job! Really looking forward to seeing it this weekend. Link to comment Share on other sites More sharing options...
cartwheels Posted June 16, 2017 Share Posted June 16, 2017 Any updates on this? Killer build as always Nico Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now