Grown Simba Posted November 19, 2014 Share Posted November 19, 2014 I have a 2008 Subaru legacy limited 2.5L AT. I'm planning on draining the transmission fluid and adding new stuff http://www.amazon.com/SUBARU-AUTOMATIC-TRANSMISSION-FLUID-BOTTLE/dp/B00FA2AD5U/ref=sr_1_1?s=automotive&ie=UTF8&qid=1416421234&sr=1-1&keywords=subaru+atf What I can't figure out is how much Fluid I would need to buy in order to satisfy the tank. I can't find in the manual how much the capacity is or online at the current moment, it only tells me how to check the levels and what brads to buy, maybe I keep skipping over it, if so I apologize for wasting time with said question. I was wondering if anyone could tell me? Greatly Appreciated Link to comment Share on other sites More sharing options...
bluedotsnow Posted November 20, 2014 Share Posted November 20, 2014 1. Lift up the vehicle. 2. Remove the drain plug (ATF) and completely drain the ATF. CAUTION: Directly after the vehicle has been running or the engine has been long idle running, the ATF is hot. Be careful not to burn yourself. 3. Check the condition of ATF. 4. Perform replacement with a new gasket, and tighten the drain plug (ATF). Tightening torque: 25 N·m (2.5 kgf-m, 18.4 ft-lb) (A) Oil pan ( Drain plug (ATF) 5. Lower the vehicle. 6. Pour ATF from the oil charge pipe. Recommended ATF: Capacity: Refill with the same amount of ATF drained from the drain plug hole. Capacity when transmission is overhauled: 2.0 L model 8.4 — 8.7 L (8.9 — 9.2 US qt, 7.4 — 7.7 Imp qt) 2.5 L model 9.3 — 9.6 L (9.8 — 10.1 US qt, 8.2 — 8.4 Imp qt) 7. Bleed the air of control valve. 8. Check the level and leaks of ATF. Link to comment Share on other sites More sharing options...
bluedotsnow Posted November 20, 2014 Share Posted November 20, 2014 (edited) the above excerpt is from jdmfsm.info a wonderful resource for out cars and many more BTW does anyone know what year subaru started using CVT tranmssions? if you have a CVT Constantly Variable Transmission YOU SHOULD NEVER USE subaruHP or STANDARD ATF!!!!!!!!!! CVT's use their own type of fluid that should be changed much more regularly than the manufacturer states! my friend asked me to service his honda civic hybrid with a CVT and his (clear) cvt fluid came out blacker than his engine oil! it hadn't been changed because its a "lifetime" fluid..... but very much needed to be and the car drove better after changing it. Edited November 20, 2014 by bluedotsnow Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now