gbianchi Posted November 29, 2014 Share Posted November 29, 2014 Just like it says 90 legacy where to start engine runs fine auto transmission never had this problem almost everything else I have done to these legacy's. Have 4 at this time. Thanks. G Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted November 29, 2014 Share Posted November 29, 2014 Start by Checking the instrument cluster itself, sometimes its connections on the back get loose. Kind Regards. 1 Link to comment Share on other sites More sharing options...
ocei77 Posted November 29, 2014 Share Posted November 29, 2014 Try a search for speedometer. Many times it is a ground wire that breaks on the circuit board. It shows where to look and fix, if that is the issue. O. Link to comment Share on other sites More sharing options...
gbianchi Posted November 30, 2014 Author Share Posted November 30, 2014 THANKS, checked the transfer connection under hood reset and it is working for now Link to comment Share on other sites More sharing options...
gbianchi Posted November 30, 2014 Author Share Posted November 30, 2014 Stopped working and check engine light came on, ho hum will check code when it warm up Link to comment Share on other sites More sharing options...
ocei77 Posted November 30, 2014 Share Posted November 30, 2014 when the speedo stops working you will get a code for the tranny lockup. The computer relies on the speedo signal to control the tranny. Fix or replace the speedo. O. Link to comment Share on other sites More sharing options...
gbianchi Posted December 5, 2014 Author Share Posted December 5, 2014 Checked code 32 33 oxygen sensor speed sensor Speedo is working. Cleared code and restarted light is off tachometer is working will wait to see if it returns. Thanks G Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now