customizing 2nd gen legy

[legacy603]

So iv been looking all over the internet for engine dress up kits colored hoses etc.body parts head and tail lights I have no problem finding performance parts but when it comes down to customization other than that I can't find anything any tips would be amazing thanks in advance

[1 Lucky Texan]

you might try boxer4racing.com , they used to keep some legacy bits in stock.

 

kartboy, mishimoto, perrin, cusco, etc. may have some stuff

 

ebay might get you some clear corners - not sure. There are youtube videos and othe r info around to bake your headlights apart to paint or install HID projectors.(the retrofitsource.com ,etc.)

 

custom rims would help, you could pull, sandblast, paint your calipers, some stuff made for Imprezas might be adapted to your car.

 

some of the guys here and over at subaruoutback.org and elsewhere may post stuff they find at junkyards in the classifieds. You can also post WTB in the Forums' classifieds - some folks may have some stuff laying around....

Edited December 4, 2014 by 1 Lucky Texan

[86BRATMAN]

There isn't much in the way of aftermarket specific for these cars. Most hose kits are very similar to the 93-01 Impreza though, you will probably have more luck looking for that stuff for them. Basically for headlights you can go with the jdm market projector lights or morrettes (spelling?). Of the two the jdm lights are the cheaper option usually going for 200-300 depending on condition and shipping charges, the morrettes are nearly double that in good condition because they are very rare. Tail lights you are limited to only the jdm versions with the clear signal section, to my knowledge there was never any aftermarket tail lights for the second gen legacy.

[legacy603]

Alright thanks guys I'll look in to it and as for rims Texan I have 06 impreza wheels now I'm going to sand blast and powder coat