sirtokesalot Posted December 21, 2014 Share Posted December 21, 2014 how hard is it to get the cluster out from my 95 legacy wagon? i want to remove the abs light Quote Link to comment Share on other sites More sharing options...
upnorthguy Posted December 21, 2014 Share Posted December 21, 2014 Pretty easy. I was just digging around one a few weeks ago as I got a fog light switch from a yard car. I think it was four screws to remove the bezel (two up inside and two on the lower edge). A few screws around the cluster (two up top again, two and lower corners). You can then pull it out a bit to get at the connectors (just squeeze and pull in the middle). See some pics here that give you an idea. Also at the 5:22 mark. Quote Link to comment Share on other sites More sharing options...
sirtokesalot Posted December 21, 2014 Author Share Posted December 21, 2014 so does the wheel have to come off or will it wiggle out between the wheel and dash? Quote Link to comment Share on other sites More sharing options...
upnorthguy Posted December 22, 2014 Share Posted December 22, 2014 Steering wheel does not need to be removed. It is a little tight, but keep wiggling and the cluster bezel comes out (that is a tighter fit with the steering wheel compared to the cluster itself). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.