Aluxes Posted January 4, 2015 Share Posted January 4, 2015 (edited) So Im upgrading my front and rear sway bars. 22mm. Also upgrading to Perrin rear endlinks. I have the rear bar and endlinks in place but there is a size-able gap between the top of the endlink and the sway bar. The slack is only on one side, cause the other side is flush. Do I need bushings on the top also? IIRC Perrin told me that they were only required on the bottom. Here are some pics. Edited January 4, 2015 by Aluxes Link to comment Share on other sites More sharing options...
Aluxes Posted January 4, 2015 Author Share Posted January 4, 2015 Ok pics didnt load. Ill try again. Link to comment Share on other sites More sharing options...
jmp6889928 Posted January 4, 2015 Share Posted January 4, 2015 Swaybar needs to be recentered on the vehicle. Perrin includes special spacers for their sway bar end links that are designed to take up the space but not interfere with the heim joint movement. I would suggest a call to them and see if you can purchase the set of spacers. I have them on my car and they work exceptionally well. Good luck. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now