steve56 Posted January 5, 2015 Share Posted January 5, 2015 I have a 99 Legacy Outback with manual trans. that has a ej22 with EGR engine swapped in it from an ej25 dohc engine. Four out the eight I/M codes are reading incomplete. They are catalyst monitor, evap system maintenance, 02 system monitor, and egr/vvt monitor. Car also has one cel for 02sensor heater bank 1 sensor 1. I have driven the car for two 15 mile drive cycles. Is having an ej22 with EGR in a Legacy Outback manual trans car possibly causing the four I/M codes. I'm not sure where to start troubleshooting. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now