ferp420 Posted January 9, 2015 Share Posted January 9, 2015 its hammer time again 2-1 - 2-7 johnson valley norv area ive got alot on my plate before the trip im porting a set of heads and doing a full reseal on my little ea82 i got some new tempo springs for up front and put my off road exaust back on and reinstall my welded diff that alone is alot for me right now but to add more im also preping a 2000 forester with the 2.2 swap its geting lifted and im building a skid plate for it aswell Link to comment Share on other sites More sharing options...
ferp420 Posted January 9, 2015 Author Share Posted January 9, 2015 ive been tearing down motors like a mad man looking for good heads and practice heads i think i got my porting plan laid out modded my intake and finishing up my spacers Link to comment Share on other sites More sharing options...
ezapar Posted January 9, 2015 Share Posted January 9, 2015 My advice for the front bumper. . . Cut of some of that plastic so you can raise the skid plat up a little. The forester already has a terrible approach angles, to add things lower than the bumper just kills it even more. Link to comment Share on other sites More sharing options...
ferp420 Posted January 9, 2015 Author Share Posted January 9, 2015 ill talk to my buddy about that i dont know how far he wants to go with it its mostly just to prtect the oil pan just in case it hits a rock in the sand or a curb Link to comment Share on other sites More sharing options...
ironworkerboomer Posted January 9, 2015 Share Posted January 9, 2015 I am planning to attend the Hammer this year. Are you camping? Link to comment Share on other sites More sharing options...
ferp420 Posted January 9, 2015 Author Share Posted January 9, 2015 the practice head ported valve bowls Link to comment Share on other sites More sharing options...
ferp420 Posted January 9, 2015 Author Share Posted January 9, 2015 ya we are camping we always camp at what we call cell phone hill because every one goes up there to make phone calls its off to the right off of boone rd right before the left turn to the lake bed one side is easy and the other side is steep i love watching the high dollor rigs get stuck on the hill and then blast right up past them are you gona run a subi out there Link to comment Share on other sites More sharing options...
ferp420 Posted January 9, 2015 Author Share Posted January 9, 2015 intake side exhaust Link to comment Share on other sites More sharing options...
ferp420 Posted January 9, 2015 Author Share Posted January 9, 2015 pile o parts Link to comment Share on other sites More sharing options...
Uberoo Posted January 13, 2015 Share Posted January 13, 2015 (edited) Even with the heads ported they still look like the worst flowing set of heads I have ever seen.Its not a jab at you,but rather the design of the ports themselves.Due to the design of the ports the intake side makes a sharp 90* bend and so does the exhaust.not to mention the HUGE amount of valve shrouding. Edited January 13, 2015 by Uberoo Link to comment Share on other sites More sharing options...
ferp420 Posted January 14, 2015 Author Share Posted January 14, 2015 i agree the ports suck and the exhaust being so different in lenght dosent help any ether but if i can get just alittle bit better it will be worth it i just hope i dont make em worse i managed to get my new tempo springs in ive been running around with my winch on the front to help break them in i dont like how they look siting in there kinda funny but the ride is awsome and im not bottoming out on every little bump Link to comment Share on other sites More sharing options...
ferp420 Posted January 14, 2015 Author Share Posted January 14, 2015 pic of the spring instaled Link to comment Share on other sites More sharing options...
ironworkerboomer Posted January 15, 2015 Share Posted January 15, 2015 ya we are camping we always camp at what we call cell phone hill because every one goes up there to make phone calls its off to the right off of boone rd right before the left turn to the lake bed one side is easy and the other side is steep i love watching the high dollor rigs get stuck on the hill and then blast right up past them are you gona run a subi out there just a spectator I think but will look ya up. Link to comment Share on other sites More sharing options...
ferp420 Posted January 18, 2015 Author Share Posted January 18, 2015 i got my block preped and my porting finnished ive been grinding and lappin the valves before grinding and cleaning the valves and after Link to comment Share on other sites More sharing options...
turbosubarubrat Posted January 18, 2015 Share Posted January 18, 2015 One of my friends is going to attend this. He builds custom axles and just finished a set of axles last week for some one that is going to this. The tube car puts out over 700hp. It has a custom suspension setup for when it goes over jumps so the chamber goes like this / \ to absorb the hard landings instead of breaking tons of parts by the end of the race. Link to comment Share on other sites More sharing options...
ferp420 Posted January 18, 2015 Author Share Posted January 18, 2015 i cut almost a 1/8" off of the valves and smothed out the ruff edges exhaust valve Link to comment Share on other sites More sharing options...
ferp420 Posted January 18, 2015 Author Share Posted January 18, 2015 intake valve Link to comment Share on other sites More sharing options...
ferp420 Posted January 24, 2015 Author Share Posted January 24, 2015 ive been serching but i cant find where to tie in to the duty c solinoid for a lock up switch on the forester im about ready to install my other motor and exhaust and i just found out my wheel bearing ont the front psssenger side is wasted i thought it just needed greese but nope its shot so ine last junk yard trip and i should be ready to role Link to comment Share on other sites More sharing options...
ferp420 Posted January 31, 2015 Author Share Posted January 31, 2015 well ive done all i can do the forester dident get modded any as its beeing sold as soon as we get back my loyale is up and running got the exhaust on the welded rear end in i dident get my new tires mounted ill have to do that after my trip i am still getting small bubbles in the radiator i dont think i got the block straight enuff or the head was cracked though but im gona run it anyway and hope for the best it seems to be pulling good and strong i might gave to stop a few times and top off the radiator i am bringing my tow bar just in case and im meeting a few people with heeps that could always drag me home Link to comment Share on other sites More sharing options...
ferp420 Posted January 31, 2015 Author Share Posted January 31, 2015 little blue just isent ready im so bummed i ran a few test runs and its geting to hot im just gona ride down with my buddy in the forester my freinds are bringing a half a dosen bikes down so i guess ll have to make do Link to comment Share on other sites More sharing options...
ferp420 Posted February 8, 2015 Author Share Posted February 8, 2015 back from the trip forester did great on the road it never get stuck in the sand but wasent happy about it at all it went through 2 tanks of gas on the sand must have been getting 2-3 miles per gallon and developed a tranny fluid leak im guessing from the front seal we couldent get it to climb any of the dunes or sand climbs my loyale dose so we mostly stuck to the sand roads and had to go up the back road to camp but was still a awsome trip Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now