Loyale 2.7 Turbo Posted May 4, 2015 Author Share Posted May 4, 2015 The mini center caps with Silicone Subaru Logo for these 15" Wheels: Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted May 4, 2015 Author Share Posted May 4, 2015 Here I am glueing the Silicone Subaru Logo to the Blank mini center Cap: Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted May 4, 2015 Author Share Posted May 4, 2015 This are the Results: Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted May 4, 2015 Author Share Posted May 4, 2015 Absolutely Perfect Fitment!!! 3 Link to comment Share on other sites More sharing options...
Dinky26 Posted May 4, 2015 Share Posted May 4, 2015 Absolutely Perfect Fitment!!! Looks wonderful, great job you have done with these. 1 Link to comment Share on other sites More sharing options...
wagonist Posted May 4, 2015 Share Posted May 4, 2015 Right, now we need to see the pics of these wheels fitted to the car 1 Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted May 4, 2015 Author Share Posted May 4, 2015 My problem now is that I couldn't find in Honduras, How to properly Paint those wheels in Black / yellow. I can not find Plasti Dip, but I didn't like the idea of "Easy peeling Paint" after all, so I wanted Black Powder Coat. Powder coating requires especial procedures, and people who does Powder coating locally, doesn't want to paint my Wheels on certain areas only; they said that it is all painted, or nothing... Which other paint has good adherence to polished "smooth" aluminium? Kind Regards. Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted May 4, 2015 Author Share Posted May 4, 2015 I wanted to Prepare the Wheels with a Primer, then Black Paint in the Main Areas and a Yellow stripe on the Lip, but somehow I'm running out of Money, I'm still Jobless, so maybe I would put them as they are right now, only Polished... What do you think about that? Or are there any simpler way to paint them on Low Budget? Kind Regards. Link to comment Share on other sites More sharing options...
wagonist Posted May 4, 2015 Share Posted May 4, 2015 Personally then, I would put them on the car as is (though maybe with a coat of clear to protect them a bit). You can always repolish them later when you find someone who can do the right thing by you. A lot of people paint wheels in "2-pack". It's harder than normal paint, and a lot easier to do with different areas on the same object. 1 Link to comment Share on other sites More sharing options...
thornleyjacob Posted May 4, 2015 Share Posted May 4, 2015 Jeszek, The simplest and less expensive way is to rattle can them; most people hate that idea but I have had some decent enough results so far for the parts on my car. Still learning though. From my understanding you really want to make sure to get a primer made specifically for aluminum, like Zinc Chromate, if those wheels are that vs. steel. Do you have Rustoleum brand of paints there? They started a line of paints that are similar to function of plasti-dip. https://www.rustoleum.com/product-catalog/consumer-brands/auto/specialty-paints/peel-coat - Jacob 1 Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted May 6, 2015 Author Share Posted May 6, 2015 ... The simplest and less expensive way is to rattle can them ... Yes, I agree with you, however, since those wheels are made of Aluminium, the Rattle can will need a primer suitable for aluminium, and that will raise the cost, also such primer is not easy to find locally, in the form of a Rattle Can, because I've never seen such a thing locally, so far... ... lot of people paint wheels in "2-pack". It's harder than normal paint, and a lot easier to do with different areas on the same object. By "2-pack" paints, you refer to the Primer + Paint, isn't it? ... Do you have Rustoleum brand of paints there? ... Yep, those are Easy to find in local Aftermarket parts' stores and Hardware Stores, such like Doit Center, or MegaLarach, but I've never seen a Primer for Aluminium on a Rattle Can, yet... maybe I better gonna search and Ask them. Kind Regards. Link to comment Share on other sites More sharing options...
thornleyjacob Posted May 6, 2015 Share Posted May 6, 2015 https://www.rustoleum.com/en/product-catalog/consumer-brands/professional/aluminum-primer-spray Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted May 6, 2015 Author Share Posted May 6, 2015 Thank you, I'll search among local stores to see if I could obtain such "Aluminium Primer" rattle can of Rustoleum, here. Kind Regards. Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted May 10, 2015 Author Share Posted May 10, 2015 (edited) ... Do you have Rustoleum brand of paints there? ... https://www.rustoleum.com/en/product-catalog/consumer-brands/professional/aluminum-primer-spray I went yesterday to search at places that sells RustOleum and other equivalent products... ...and couldn't find the Aluminium Primer, only the Standard "Multi Surface" Primers... Kind Regards. Edited May 10, 2015 by Loyale 2.7 Turbo Link to comment Share on other sites More sharing options...
thornleyjacob Posted May 11, 2015 Share Posted May 11, 2015 That sucks; but man you do live on a little island. Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted May 11, 2015 Author Share Posted May 11, 2015 That sucks; but man you do live on a little island. My HomeTown is on the Little island of Roatán, But I moved to the Mainland long ago... Kind Regards. Link to comment Share on other sites More sharing options...
thornleyjacob Posted May 12, 2015 Share Posted May 12, 2015 Well with a boat town so close; check a boat repair shop or parts place. They use aluminum primer there a lot from my understanding. 1 Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted May 25, 2015 Author Share Posted May 25, 2015 Well with a boat town so close; check a boat repair shop or parts place... You were right, I asked a guy I know who has a Dry Dock and do multiple repairs on Merchant Vessels and Fishing Vessels, and he told me that he obtains Aluminium Primer at the Local "Pinturas Sur" paint factory, I can't believe that I completely forgot abot them ... ... I must had a Brainfart. In fact the "Sur" (spanish for South) paint factory, uses German formulas, they sells the "Klass" and "Glasurit" automotive paints locally, I painted my beloved Subaru "BumbleBeast" in "Radioactive Yellow" using their "Glasurit" poliurethane paint, long years ago. So, I'll check at the local "Sur" paints' store, tomorrow... Kind Regards. Link to comment Share on other sites More sharing options...
coxy Posted May 25, 2015 Share Posted May 25, 2015 Years ago when preparing rally cars I used all sorts of expensive paints including one made for the trucking Industry by Dulux paints (Now PPG) and guess what I found to be the best for rally cars, It did not chip like the too hard truck paint (Dulux Acran) and with some lateral thinking worked perfectly and gave a high quality finish. This is the secret Industrial Enamel (Now available in about 300 colors) mixed with Enamel Add (A Hardner like two pack paints) cost One litre of Enamel @$14.00 AU one Tin of Enamel Add @ $16.00 Au (Only used about 20% of that for a Litre) Spray with a high quality Spray gun designed for metallic paints (Extra fan air holes in the Nozzle) the trick them was paint and wait 20 minutes the paint was then dry with the hardner added unlike normal enamel that takes ages to dry. Then the real trick is to Buff the paint 20 minutes after being applied with "Burnishing Creme" a ultra fine cutting compound designed for two pack Paints, Result is a very high quality finish similar to a very good quality Acrylic Paint with about twenty hand rubbed and polished coats,The Finish is superb done right and dirt cheap as you use about a quarter of a litre of thinners, One Litre of Enamel and the enamel add to paint a whole car Inside and out. Compare that to the cost of fancy two pack or Polyurethane paints (Which are Great) Biggest bonus was however finding out unlike all other paints used before it was extremely stone chip resistant something of a major issue with Rally cars because they are always sideways copping a spray of gravel on the side of the car. 2 Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted June 1, 2015 Author Share Posted June 1, 2015 Thank you for your kind advice. Yes, somehow that is what I obtained at "Sur" paintings: the Aluminium Primer and then, an industrial Grade, Black Paint, chemically designed to withstand the requirements of Heavy Machinery, so the paint will be much more chip resistant, than the average paint. Now I need to find the proper time to do such paintings... I'll borrow an air compressor & hardware from a friend. Kind Regards. Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted June 4, 2015 Author Share Posted June 4, 2015 While I have the time to do the Paintings, I've been gathering the other needed parts, to instal those wheels on my "BumbleBeast" such as the full metal schrader valves Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted June 4, 2015 Author Share Posted June 4, 2015 Since the rusty lug Nuts that came along the Hyundai Steel Rims I have, are designed to hold Hub Caps (I dislike Hub Caps so I didn't put them) ... ...their wide flat washers doesn't allow them to fit on the Aluminium Wheels, so I had to search for new lug Nuts that fits good on the... ...Aluminium wheel's Base, shown above. I found this ones which are Strong and well built: ...which seems to fit well, but has an elongated curvy base, that is not going deeply inside the 45º portion of the seats. What do you think about that? Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted June 6, 2015 Author Share Posted June 6, 2015 Maybe I should use another kind of Lug Nuts that has a small 45º bottom, instead those ones. I'll like to know your Opinions. Anyone with experience in such matter? Today I'll do the Paint Job, wish me Luck! Kind Regards. Link to comment Share on other sites More sharing options...
DSwanson1 Posted June 6, 2015 Share Posted June 6, 2015 I have a question. I really liked the look of the 240sx rims that you posted early in this thread. do I need to use an adapter plate for those rims or will they fit the stock hubs. And also if I wanted to upgrade to 15" rims and some standard size tires will I need to lift the car at all or should I be good? Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted June 9, 2015 Author Share Posted June 9, 2015 ... I really liked the look of the 240sx rims... Thanks, have you Voted in the Poll? I have a question ... do I need to use an adapter plate for those rims or will they fit the stock hubs. Those Rims does Not fit the Stock Hubs, because you know, Subaru used 4X140 lug pattern on these Models, and the Rims I posted here, are 4X114.3 ... You can use an adapter, there are some made by other USMB members. In my Case, I redrilled the Hubs almost two decades ago, see: Hubs Re-drilled in that pattern. Follow the Link above for more information about that. But let me tell you that my Subaru "BumbleBeast" has been working like that, Flawlessly since year 1996, almost twenty years of rude driving, Due to the Weekend Offroadings, without issues... All your answers are in previous posts of this Thread. Kind Regards. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now