angerthis Posted January 19, 2015 Share Posted January 19, 2015 Okay I'm just curious I'm almost certain I don't need these for my RX Turbo EA82 I'm just curious I'm not even familiar with these gaskets on any ea82 engine If you could tell me where they going what they are that would be awesome thank you guys Link to comment Share on other sites More sharing options...
skishop69 Posted January 19, 2015 Share Posted January 19, 2015 Upper left is a Hitachi carb base gasket and the upper right is a tbi gasket. No clue on top center or bottom two. Link to comment Share on other sites More sharing options...
Jarred87GL Posted January 19, 2015 Share Posted January 19, 2015 Also curious, i recieved the same ones in a gasket kit Link to comment Share on other sites More sharing options...
angerthis Posted January 19, 2015 Author Share Posted January 19, 2015 Upper left is a Hitachi carb base gasket and the upper right is a tbi gasket. No clue on top center or bottom two. I thought the TBI Gasket was more like an o-ring type of material? I see if anybody else can play the guessing game lol Link to comment Share on other sites More sharing options...
ihscout54 Posted January 19, 2015 Share Posted January 19, 2015 I think the bottom 2 look like oil fill tube gaskets, the top right looks possibly like a gasket for a turbo or mpfi tb. The tbi used an o-ring. Middle one doesnt look familure, and top left has been identified by skishop. Link to comment Share on other sites More sharing options...
Caboobaroo Posted January 19, 2015 Share Posted January 19, 2015 I believe the center one is an IAC gasket and the bottom two are spider intake coolant crossover gaskets. Link to comment Share on other sites More sharing options...
jono Posted January 19, 2015 Share Posted January 19, 2015 (edited) Confirming what Caboobaru says above, the bottom two green ones are the coolant transfer gaskets on the lower back section of mpfi inlet manifold (maybe not spider specific) - very handy for when you replace those small 12 & 14? mm welch plugs at the back. The large green one looks like spider TB to inlet manifold gasket - they are not same as mpfi non spidey Edited January 19, 2015 by jono Link to comment Share on other sites More sharing options...
skishop69 Posted January 19, 2015 Share Posted January 19, 2015 Thank you for correcting me. Shouldn't have said tbi. Force of habit. Both my EA82's have spider manifolds so just plain tb. My bad. Link to comment Share on other sites More sharing options...
angerthis Posted January 20, 2015 Author Share Posted January 20, 2015 I must be brain farting What is spider manifold? Is that just a fancy way of saying multiport fuel injection Like my turbo EA82 is Link to comment Share on other sites More sharing options...
jono Posted January 20, 2015 Share Posted January 20, 2015 (edited) www.google.com EA82 spider manifold image shazam! came on XT turbo and some others ? Looks more an EJ style of inlet manifold over the old shar[p angle old mpfi EA82 inlet. It is a 4 legged spider not got 8 legs ! Edited January 20, 2015 by jono Link to comment Share on other sites More sharing options...
angerthis Posted January 20, 2015 Author Share Posted January 20, 2015 www.google.com EA82 spider manifold image shazam! came on XT turbo and some others ? Looks more an EJ style of inlet manifold over the old shar[p angle old mpfi EA82 inlet. It is a 4 legged spider not got 8 legs ! Oh yeah I knew that Like I said I was brain farting the older Impreza they had the 1.8 right I have never seen an XT with that motor I've seen them with the EA82 to multiple fuel injected Like what's in my 86 rx Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now