subarusaver Posted February 10, 2015 Share Posted February 10, 2015 (edited) OKAY, I knew my intake was a little warped when I put it on,so I used two gaskets on each side and Indian Head shellac............AND.............IT leaked....I have decided to fix it,so I took it off and have two options since I cant find one anywhere (My local Knoxville Tn Pull a part has none for a long time now)...Option 1) : buy a piece of granite or marble and glue sandpaper to it and SELF MILL it ...OR Option 2) MACHINE SHOP....AND THEY ARE Pricey......so far 70-120 $... Any Ideas? Anyone have one to sell ? It's not warped ALOT in my opinion, but it does rock front to back on a flat surface... I just want it to be right and NOT LEAK.. THANKS FOR ANY HELP Edited February 10, 2015 by subarusaver Link to comment Share on other sites More sharing options...
joe5 Posted February 10, 2015 Share Posted February 10, 2015 could you just snag another intake a jy? Probably less than machining the one you got Link to comment Share on other sites More sharing options...
rrgrr Posted February 11, 2015 Share Posted February 11, 2015 I have an spfi mani if you want it maybe I can ship it. Link to comment Share on other sites More sharing options...
DaveT Posted February 11, 2015 Share Posted February 11, 2015 A piece of 1/4" plate glass would work nearly as well and be a lot less expensive. Link to comment Share on other sites More sharing options...
DaveT Posted February 11, 2015 Share Posted February 11, 2015 A piece of 1/4" plate glass would work nearly as well and be a lot less expensive. Link to comment Share on other sites More sharing options...
subarusaver Posted February 11, 2015 Author Share Posted February 11, 2015 I have an spfi mani if you want it maybe I can ship it. thanks, but I need one for a carb. Link to comment Share on other sites More sharing options...
DaveT Posted February 11, 2015 Share Posted February 11, 2015 I have a carb one. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now