libertyherb123 Posted February 20, 2015 Share Posted February 20, 2015 Hi All. I have just been flushing the heater core in my EJ22 and I cannot remember which hose goes to which connection at the engine. There are two steel hoses coming out of the engine (a top one and a bottom one separated by about 2 inches) which one goes to the heater core and which one is the return? Cheers guys. Link to comment Share on other sites More sharing options...
Fairtax4me Posted February 20, 2015 Share Posted February 20, 2015 It doesnt really matter, as flow through the core will be the same either way. When installed correctly the hoses will sort of lay parallel to each other, one just above the other. If they look like they're crossed or twisted or they don't look like they're right, swap them and see if they look better. They shouldn't actually touch because that will allow them to rub together and could cause them to rub through and burst. Link to comment Share on other sites More sharing options...
libertyherb123 Posted February 21, 2015 Author Share Posted February 21, 2015 Thank you! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now