Navybratboy Posted March 7, 2015 Share Posted March 7, 2015 I need help wiring my dual dxm260(I believe that what it is) into my 1987 gl base I've looked online and YouTube's it with no luck please help only the front work Link to comment Share on other sites More sharing options...
l75eya Posted March 7, 2015 Share Posted March 7, 2015 You have to install your own rear speakers. Also, run your own speaker wire to all four speakers. Don't use the stock wires. If you do use stock wiring you will burn out your radio when you adjust the fade and balance. Link to comment Share on other sites More sharing options...
Navybratboy Posted March 12, 2015 Author Share Posted March 12, 2015 Hey um question guys and gals um does any one know how to setup an 83 intake manifold onto an 82 block both are ea81s Link to comment Share on other sites More sharing options...
rdweninger Posted March 12, 2015 Share Posted March 12, 2015 What exactly are you doing? If it is a straight swap, just bolt it on. Use OEM gaskets. If you are using the Hitachi carb - good luck. It can be done. If you are going with a Weber, there is tons of info on this forum. You may want to use an EA82 intake. Guys and Gals ... I am not positve, but it is my belief that this is not the site to meet girls. It's ok to laugh! As long as your car is still running. 1 Link to comment Share on other sites More sharing options...
Navybratboy Posted March 15, 2015 Author Share Posted March 15, 2015 spoob any one know how to put my 83 intake and Hitachi carb in to my 82 block Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now