Scooner Posted March 8, 2015 Share Posted March 8, 2015 (edited) What's up everyone? I have sold a quad headlight grill and headlight buckets to a fella in Australia and as you can imagine it is quite a long ways to ship. He wants to convert his Brat to a quad GL setup and the question I have is have any of you done this conversion and is there anything else he might need? I'd hate to send him just the grill and buckets just to have to send more later. I appreciate any help you guys are willing to give. Also, is there a write up I am missing? A quick Google search was fruitless! Thanks again, Levi This is for a first gen Brat...obviously haha Edited March 8, 2015 by Scooner Link to comment Share on other sites More sharing options...
moosens Posted March 8, 2015 Share Posted March 8, 2015 Radiator support. 1 Link to comment Share on other sites More sharing options...
Brett! Posted March 9, 2015 Share Posted March 9, 2015 Not sure what to call it, but the front end body panel is different between the tow models. The 2 headlight version cuts down in to that panel and the quad headlight is straight. Link to comment Share on other sites More sharing options...
Scooner Posted March 9, 2015 Author Share Posted March 9, 2015 Really? I've looked into taking that radiator support/front headlight/front clip part off and it looks like a nightmare because it is pinch welded onto the frame rails. Dang, I was really hoping all that was needed was the headlights and their mounts, the grill and possibly the extra headlight electrical connectors. Seems dumb and expensive of subaru to manufacture two different front radiator supports though right? Link to comment Share on other sites More sharing options...
Scooner Posted March 9, 2015 Author Share Posted March 9, 2015 You mean to tell me this is different between the GL and DL?? Link to comment Share on other sites More sharing options...
bratman18 Posted March 9, 2015 Share Posted March 9, 2015 I know they're different on the gen 2's, but I was still able to convert from dual to single on mine. I'd think it could be done on the gen 1 as well. Not sure though. Link to comment Share on other sites More sharing options...
Leeroy Posted March 9, 2015 Share Posted March 9, 2015 I believe the internal sheet metal or radiator support panel is the same for the Gen 1 models (at least according to my parts catalogues) but, as noted by Brett the front skirt is different. Link to comment Share on other sites More sharing options...
Scooner Posted March 9, 2015 Author Share Posted March 9, 2015 I see, maybe he was referring to the bottom rock guard/roll pan? Speaking of which I assume you did get it right bratman, and it wasn't crushed from shipping? Link to comment Share on other sites More sharing options...
bratman18 Posted March 9, 2015 Share Posted March 9, 2015 (edited) I see, maybe he was referring to the bottom rock guard/roll pan? Speaking of which I assume you did get it right bratman, and it wasn't crushed from shipping? Haven't received it yet, I'll have to check the tracking number and see where it is. Says it'll be here Wednesday. Edited March 9, 2015 by bratman18 Link to comment Share on other sites More sharing options...
Scooner Posted March 9, 2015 Author Share Posted March 9, 2015 Cool, yeah I guess you're right it hasn't been that long since I shipped it. It is in the most homeless packaging ever, you're going to love it! 1 Link to comment Share on other sites More sharing options...
Brett! Posted March 9, 2015 Share Posted March 9, 2015 Hey, are you parting that car out? Ill take the front fenders if they are not spoken for. Link to comment Share on other sites More sharing options...
bratman18 Posted March 9, 2015 Share Posted March 9, 2015 Hey, are you parting that car out? Ill take the front fenders if they are not spoken for. http://www.ultimatesubaru.org/forum/topic/152197-gen-1-brat-parts/ Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now