soopsoop Posted March 10, 2015 Share Posted March 10, 2015 i trieed to remove the pcv hoses from the valve covers on my 88 dl e82 and the hoses were hard as a rock and broke is it possible to get molded hoses or just get vacume line and sort of put them on? Link to comment Share on other sites More sharing options...
SoobDood05 Posted March 10, 2015 Share Posted March 10, 2015 (edited) i had the same issue with my old wagon they were cracked on the very end. i went to the dealership and they have them just a little spendy for hoses. if you find some same inside diameter pcv/oil resistant hose that would fit i dont see why it wouldnt work just would not be pre-molded like stock .just my .02 Edited March 10, 2015 by SoobDood05 Link to comment Share on other sites More sharing options...
somick Posted March 10, 2015 Share Posted March 10, 2015 I failed a smog test because I used regular 5/8' hoses. I do not know the situation in Washington but in California they made me to go to the dealer and buy EMISSION hoses there, They were not very expensive - somewhere around 7 to 15 dollars. Sam Link to comment Share on other sites More sharing options...
soopsoop Posted March 15, 2015 Author Share Posted March 15, 2015 i will try the stealership some of there parts are rediculasly expensive. went to get a gallon of prop wash there and they wanted 10 dollars a gallon,that's to much. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now