Phizinza Posted March 17, 2015 Share Posted March 17, 2015 Will a gen 1 Legacy starter motor (4 bolt manual gearbox) fit a gen 3 Legacy (8 bolt manual gearbox)? I've found some on ebay which state they are for all the EJ manual gearbox models... Link to comment Share on other sites More sharing options...
Phizinza Posted March 18, 2015 Author Share Posted March 18, 2015 No ones knows? Link to comment Share on other sites More sharing options...
upnorthguy Posted March 18, 2015 Share Posted March 18, 2015 I'm sure someone knows the answer to your question...just no one that has viewed it as of now. Just over 24 hours isn't always long enough for the heavy hitters to chime in. Link to comment Share on other sites More sharing options...
Rooster2 Posted March 18, 2015 Share Posted March 18, 2015 I don't know the answer to your question, but suggest you go on line to auto parts stores. Look up the part number for what would be a gen 1 model year car, and compare the part number to what would be a gen 3 model year car. If the starter model numbers are not the same, then I would not buy what is for sale on ebay. Link to comment Share on other sites More sharing options...
mikaleda Posted March 18, 2015 Share Posted March 18, 2015 I can garuntee the part numbers will not be the same. That doesn't mean the starters will be differant phiscally, the best way to find out would be try it and see. Link to comment Share on other sites More sharing options...
Phizinza Posted March 18, 2015 Author Share Posted March 18, 2015 It was almost off the bottom of the page. This forum seems very active these days and back when I used to be here a lot answers would come pretty quick. I was just bumping the post up. I won't be buying an eBay one, I was just referencing it. I'll get a second hard one and open it up, clean it out. It's what I've always done. Ok. Looks like I'm out ta time and will just have to bite the bullet, I'll let you all know if it is compatible. Link to comment Share on other sites More sharing options...
1 Lucky Texan Posted March 19, 2015 Share Posted March 19, 2015 what's wrong with yours? the plunger and contacts are available in re-work 'kits'. 1 Link to comment Share on other sites More sharing options...
MilesFox Posted March 19, 2015 Share Posted March 19, 2015 I have an 87 gl ea82 5mt starter in a 96 impreza ej22 4eat if that answers ya. Link to comment Share on other sites More sharing options...
Phizinza Posted March 19, 2015 Author Share Posted March 19, 2015 Well a 95 Liberty (Legacy, EJ22) starter fitted the 99 Outback (EJ25 SOHC). At the wrecker I compared auto to manual starters and the manual one is longer in the bellhousing than the auto. The auto starter did look a lot like the older EA starters. But it was obvious it would not work with the manual EJ boxes. The car isn't mine, well it was... The new owners contacted me for advise on getting the starter motor replaced. I offered to do the work for them.The starter I fitted was a 23300-AA280, the car had a 23300-AA380. One of the auto 95 models had a A23300-AA390. I really have no idea how anyone works out what the starter will fit by the model numbers. Link to comment Share on other sites More sharing options...
ocei77 Posted March 19, 2015 Share Posted March 19, 2015 Use opposedforces. click on part number under engine electronics, then click on car type and you will see which models etc which are compatible. O. Link to comment Share on other sites More sharing options...
AdventureSubaru Posted March 21, 2015 Share Posted March 21, 2015 As I understand it for the EJ series cars and probably beyond there is distinctions between manual trans starters and auto trans starters but a starter from a 91 should fit a 2001 and vice versa. (And further beyond as fox mentioned) I'm not speaking from first hand knowledge but I don't think there's any difference in EJ starters except whether it fits a manual or automatic. Link to comment Share on other sites More sharing options...
Phizinza Posted March 21, 2015 Author Share Posted March 21, 2015 And it sounds like manual ea82 for auto ej. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now