ARJ Posted April 23, 2015 Share Posted April 23, 2015 Does anyone know if a 1987 brat (brumby) ignition lock assembly will fit a 1991 brat (brumby) or where and if a 1991 lock assembly can be purchased thanks ARJ Link to comment Share on other sites More sharing options...
jono Posted April 23, 2015 Share Posted April 23, 2015 (edited) 100% will, but according to the mob I bought my new lock from claimed some Brumbies may not be same. I got mine from ebay. Bought last two they had on the listing. Came with matched door locks as well Interestingly - the aftermarket part number was NID 1600 . Came with new wire contacts at back as well and not the wire loom as indicated below in Leeroys link to Nice Products depiction Edited April 23, 2015 by jono Link to comment Share on other sites More sharing options...
Leeroy Posted April 23, 2015 Share Posted April 23, 2015 Search for Nice Products: https://niceproducts.com.au https://niceproducts.com.au/product/nic1600-lock-switch/ Link to comment Share on other sites More sharing options...
Leeroy Posted April 23, 2015 Share Posted April 23, 2015 This one if you want door looks too: https://niceproducts.com.au/product/nid1600-ignition-barrel-doors/ Link to comment Share on other sites More sharing options...
jono Posted April 23, 2015 Share Posted April 23, 2015 Good find Leeroy ! I did not try the search on the part number. I did however pay more than I needed to then on ebay. I'll go back and edit out the supplier I got mine from Link to comment Share on other sites More sharing options...
Leeroy Posted April 24, 2015 Share Posted April 24, 2015 This one for Gen 1 Subarus: https://niceproducts.com.au/product/nid1601-ignition-barrel-doors/ Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now