firstsubi Posted April 24, 2015 Share Posted April 24, 2015 (edited) Hey everyone!, I bought the Loyale wagon off of caspice ???? and am thinking of putting in a cat back exhaust this weekend or the very near future. I was wondering what you are running or would suggest. Thinking of 2.5" cat back to a performance muffler with maybe a 3" output on muffler. Edited April 24, 2015 by firstsubi 1 Link to comment Share on other sites More sharing options...
DaveT Posted April 24, 2015 Share Posted April 24, 2015 I made an all stainless exhaust for mine. Used 2" after the y pipe. I did not do it for power gain, as it won't make a significant difference. I got tired of replacing expensive pipes with catalytic converters that would fail due to rust. And when I've had to work on something that requires exhaust removal, it is so much nicer to just unbolt stainless hardware. There's a link to my website about it somewhere in another thread. Link to comment Share on other sites More sharing options...
firstsubi Posted April 24, 2015 Author Share Posted April 24, 2015 Yeah defiantly using stainless.. Is 2.5" an alright size to use? I want a better sound not performance as that's asking way too much lol Link to comment Share on other sites More sharing options...
DaveT Posted April 24, 2015 Share Posted April 24, 2015 2.5 would just cost more. 2 is bigger than stock. I'm pretty sure that the muffler design will have more effect on the sound. Link to comment Share on other sites More sharing options...
scubaroo84 Posted April 25, 2015 Share Posted April 25, 2015 2.5 inch is too big for a stock engine. I have a turbo and other work done and I run a 2.5 exhaust. The bigger diameter exhaust the deeper the tone. I had 2 inch when I was n/a and it worked just fine with a flowmaster. Link to comment Share on other sites More sharing options...
BEECHBM69 Posted April 25, 2015 Share Posted April 25, 2015 2" stainless with a stainless Magnaflow on all three of mine. Dan 1 Link to comment Share on other sites More sharing options...
jonas Posted April 25, 2015 Share Posted April 25, 2015 2" stainless with a stainless Magnaflow on all three of mine. Dan Magnaflow on my Brat. Nice sound without being too loud or "ricey". Eventually have the whole system converted to stainless. Link to comment Share on other sites More sharing options...
ennbenn72 Posted April 26, 2015 Share Posted April 26, 2015 I'm going 2.25 with a Thrush Welded. Kinda interested to see how the dual in dual out sounds. Link to comment Share on other sites More sharing options...
bratman2 Posted April 26, 2015 Share Posted April 26, 2015 Third Magnaflow 2" SS muffler owner. Been on my 87 Brat for many years. Sounds very good to me and like already mentioned, not super loud or raspy. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now