Jump to content
Ultimate Subaru Message Board

1999 forester engine swap question


Recommended Posts

I was thinking of doing a 2.2 swap into the '99 forester but i just acquired a crashed 1999 legacy w/ 93k on the motor and some work already done to it. the numbers look close:

legacy: XFJXVO2.5DCD

forester: XFJXVO2.5HEG

 

is this a direct swap?

 

thank you in advance

 

gregg

Link to comment
Share on other sites

No, your 99 Forester has a single over head cam, the 99 Legacy has a double over head cam motor. Both motors are 2.5 displacement, but have different computer control management systems, so can't be interchanged.

 

There may be some "work arounds" to piece something together, but not a direct swapl

Link to comment
Share on other sites

Those are emission family ID numbers. That only tells you the type of emission equipment on the car. (O2 Sensor type, evap system design, Cat design)

 

As long as both engines are SOHC 2.5 they'll swap fine.

If the legacy has the DOHC 2.5, no way it'll work.

Link to comment
Share on other sites

No, your 99 Forester has a single over head cam, the 99 Legacy has a double over head cam motor. Both motors are 2.5 displacement, but have different computer control management systems, so can't be interchanged.

 

There may be some "work arounds" to piece something together, but not a direct swapl

yup....legacy is dohc!! thanks

 

 

that motor will go into a 97 legacy 2.5 dohc thought correct?

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...