dp213 Posted May 11, 2015 Share Posted May 11, 2015 I am putting a 95 2.2 into a 98 gt. I was told to put the 98 wiring on the 95 intake. I did but the coil pack from the 95 has a different plug and the coil pack from the 98 doesn't mount. What to do? Thanks Dp213 Link to comment Share on other sites More sharing options...
Crawlerdan Posted May 11, 2015 Share Posted May 11, 2015 make it fit, i just use the one or two holes that line up Link to comment Share on other sites More sharing options...
idosubaru Posted May 11, 2015 Share Posted May 11, 2015 +1 - just make it sit there, not a big deal. it's about as benign as you can get - line up one bolt, zip tie it, etc - it's a static part that's not going anywhere. there's no need to swap wiring harnesses - the EJ22 is plug and play. you can simply go back to the EJ22 wiring harness? that's the 100% solution without rewiring, repinning, or splicing in the correct connector. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now