DSwanson1 Posted June 19, 2015 Share Posted June 19, 2015 So this is what I found when I thought I might have a vacuum leak under the hood. This is the joint that the line goes to. This is what is sticking out of the hole. To me it looks like the plastic connector broke off for this line but I can't seem to find where it might have connected to. I tried to figure it out using my Chilton's but am a little confused by the charts. Any help would be appreciated guys. Thanks a bunch. Link to comment Share on other sites More sharing options...
DaveT Posted June 19, 2015 Share Posted June 19, 2015 The end of the hose looks like it broke off either the EGR solenoid, or the purge solenoid. Link to comment Share on other sites More sharing options...
DSwanson1 Posted June 19, 2015 Author Share Posted June 19, 2015 I still not too knowledgeable about cars. I do know what the general look of most solenoids are but I can seem to find some thing that looks like a solenoid that is broken. I am also not adept at reading the repair manuals yet so I am not even sure where to look for either of those solenoids. Any chance someone could post a pick of what they think should be connected to that vacuum line? Link to comment Share on other sites More sharing options...
Dinky26 Posted June 19, 2015 Share Posted June 19, 2015 What does the other end plug into? 1 Link to comment Share on other sites More sharing options...
naru Posted June 19, 2015 Share Posted June 19, 2015 http://www.partsgeek.com/catalog/1992/subaru/loyale/air_intake/egr_vacuum_solenoid.html Link to comment Share on other sites More sharing options...
DSwanson1 Posted June 20, 2015 Author Share Posted June 20, 2015 The other end plugs into a three way joint which plugs into another three way joint and a few other items. I haven't had a chance to take some other pictures but I will as I can. Link to comment Share on other sites More sharing options...
jono Posted June 21, 2015 Share Posted June 21, 2015 just plug it for the meanwhile and see how things are ? 1 Link to comment Share on other sites More sharing options...
DSwanson1 Posted June 27, 2015 Author Share Posted June 27, 2015 So I plugged the vacuum line with a screw and now the engine seems to run smoother. Still not sure what the line goes to. I looked up pictures of the EGR valve online but can't seem to find anything that looks like it under my hood. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now