NWRallySports Posted June 25, 2015 Share Posted June 25, 2015 Hello USMB Members! We recently received some interest in our EJ - EA Oil Adapter lines and would like to do a special deal with the USMB community! You can view our EJ2EA results here If members (on this forum specifically) generate enough interest for this product, we would be happy to not only restock them, but also give a great deal on the price! (To everyone who contacts me on USMB). If anyone interested would shoot me a PM or post on this thread so I can get a head count, I'd be happy to get the order going so we can send them out ASAP! We should be updating them on our website soon (NWRallySports.com). Thanks and hope you like our products! -NWRS 1 Link to comment Share on other sites More sharing options...
Crazyeights Posted June 26, 2015 Share Posted June 26, 2015 I'll bite, I could use at least one if they work out. I'll watch your site for the update. Link to comment Share on other sites More sharing options...
turbosubarubrat Posted June 26, 2015 Share Posted June 26, 2015 How much would it cost? I'm going to fab something up soon for the oil sender since the engine is out on my hatch currently Link to comment Share on other sites More sharing options...
mcgarvey2001 Posted June 26, 2015 Share Posted June 26, 2015 Definitely interested! Link to comment Share on other sites More sharing options...
bratman18 Posted June 26, 2015 Share Posted June 26, 2015 Interested, depending on price. Link to comment Share on other sites More sharing options...
NWRallySports Posted June 26, 2015 Author Share Posted June 26, 2015 Hey guys! Things are looking good, we contacted our manufacturer today and put an order in. As far as price, we will not know exactly till next week until we hear back, but it will definitely be reasonable and you guys will get an extra 10-15% off!! Keep posting on this thread if you would like to be included in the deal and have a great weekend! -NWRS 2 Link to comment Share on other sites More sharing options...
Subarutex Posted June 29, 2015 Share Posted June 29, 2015 In for this.I have one made up of AN components, but have a bit of leaking from it. Link to comment Share on other sites More sharing options...
Tye Posted August 16, 2015 Share Posted August 16, 2015 i'm interested Link to comment Share on other sites More sharing options...
turbosubarubrat Posted August 16, 2015 Share Posted August 16, 2015 Made mine awhile back and it hasn't leaked. I coated the treads with sealer along with the out side since it was easier than trying to paint it. I welded a 3/8" 90 to the thread adapter on the block then welded a nut to the other side of the 90. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now