Jump to content
Ultimate Subaru Message Board

Manual Transmission Plug


Recommended Posts

I noticed that my Transmission was wining really bad, so I checked the gear oil when I got home... none.    Started to add fluid and it all just started pouring out onto the ground.  Got underneath and my transmission drain plug is missing.    Anyone have any idea what size / pitch the plug is or where I can get a replacement for a Gen1 Brat with the 4 speed manual. 

Link to comment
Share on other sites

Well, no replies. 

 

Here is what I have done so far.   I got underneath with pair of calipers to measure the hole.  Looks like its 24mm.   If its a common thread pitch, then it might be a 24 by 1.5mm plug.  I looked up what other more modern cars have that type of plug and had to special order one from Napa.   Ill get it tonight and see if its fits then report back with the results. 

Link to comment
Share on other sites

Napa only had the oil plug in their lexicon of parts.  However after spending to much and some trial and error I was able to find the right size.   It is a 26mm by 1.5 pitch plug.  

 

They are not very common, but they were common in older Mercedes.   The one I used was a 85 380SL  Fits snug, and isn't leaking. 

 

Here is a link for years and models 

http://www.partsgeek.com/ss/?make=Mercedes&ssq=W0133-1640723&brand=Febi

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...