Leeroy Posted July 28, 2015 Share Posted July 28, 2015 I went to take a photo of my coupe but being assembled it is not clear how it all goes together. There are tiny semicircle 'cutouts' in the glass and I think they just sit on the brackets... I have the picture from the parts catalogue, perhaps that might help you? Link to comment Share on other sites More sharing options...
Datsunrides Posted July 29, 2015 Author Share Posted July 29, 2015 Nothing fancy but.... This just showed up today gratis! Thank you very much Jesse! I went to take a photo of my coupe but being assembled it is not clear how it all goes together. There are tiny semicircle 'cutouts' in the glass and I think they just sit on the brackets... I have the picture from the parts catalogue, perhaps that might help you? It may. Please post it if you get the chance. I see where the little notches are, but I think there is a rubber piece that goes between the notch and the metal bracket. I also found a place that would recore the radiator for less than I bought the car for (!) so I dropped it off and should get it back Thursday. We'll see how it comes out *NEW REQUEST* As with most everything else, this is probably a next to impossible request. I need one of the plastic end pieces for the stainless rocker trim if anyone can spare one. Link to comment Share on other sites More sharing options...
Leeroy Posted July 29, 2015 Share Posted July 29, 2015 May or may not assist you.... Link to comment Share on other sites More sharing options...
Datsunrides Posted August 1, 2015 Author Share Posted August 1, 2015 Thanks Leeroy, that does help a little, but of course an actual part would be best (if any still exist). The diagram give me enough info to fab something up worse case. Also, I will consolidate below the things I would like to source as the thread is stretching out a bit and some items have been found so, What I would like to find as of 8/1/15, Dome light lens 1 rectangular seat trim (just below headrest) glove box insert Molded rad hoses (new only) Heater valve (new only) Mark Link to comment Share on other sites More sharing options...
Subafreak Posted August 5, 2015 Share Posted August 5, 2015 Any idea what the correct dome light lense looks like? Link to comment Share on other sites More sharing options...
Datsunrides Posted August 6, 2015 Author Share Posted August 6, 2015 Nope, both cars just had the bases. Link to comment Share on other sites More sharing options...
moosens Posted August 6, 2015 Share Posted August 6, 2015 Jesse do you have a stage one parts manual handy? I think you still have my 77-79 which might have some stage one 1977 drawings in there. Link to comment Share on other sites More sharing options...
Subafreak Posted August 7, 2015 Share Posted August 7, 2015 I would have to look through it and see what it's got in it. Link to comment Share on other sites More sharing options...
Leeroy Posted August 10, 2015 Share Posted August 10, 2015 Do these help? Link to comment Share on other sites More sharing options...
Datsunrides Posted August 11, 2015 Author Share Posted August 11, 2015 Thanks Leeroy. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now