SLudwig Posted July 8, 2015 Share Posted July 8, 2015 (edited) 1997 Legacy (wagon). About once a month I have to pull the driver's side headlight assy out to get at the turn-signal connector. The system acts like the bulb is out, but it is something inside the connector. I twist, tweak, and tie-wrap wires in different positions but can never get it to stay fixed permanently. Subaru parts department said the connector is not available to order, and salvage yard wants to sell only the whole harness. Any ideas on where to get this connector without having a part number, or how to fix? Edited July 8, 2015 by SLudwig Link to comment Share on other sites More sharing options...
Fairtax4me Posted July 8, 2015 Share Posted July 8, 2015 Post in the wanted section here. And check the for sale section because there are always a few people parting out cars from that era. Link to comment Share on other sites More sharing options...
Rooster2 Posted July 8, 2015 Share Posted July 8, 2015 Do you have a "u-pull" yard in your area? If so, go to the yard with wire cutters, and remove just what you need, the connector, bulb socket, or what ever. Cut the wires as far back as you can to give yourself extra wire to splice in the new unit. I did just that to repair a Toyota that had cracked and broken plastic sockets for the turn signals. A U Pull yard will not care if you remove just a portion from a wiring harness. Link to comment Share on other sites More sharing options...
Caboobaroo Posted July 8, 2015 Share Posted July 8, 2015 It's one of the tangs inside the socket that needs to be pulled back out. It's common on that era of Legacys and I tend to fix them for free when people come in for work. Pop the bulb out and grab a pick. Pull the three tangs out just a hair so it will make better contact with the bulb. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now