Rooster2 Posted July 11, 2015 Share Posted July 11, 2015 Bought a new wiper transmission, but can't figure out how to pull the plastic ball and socket connectors (bushing assembly) apart to disassemble. I tried to wedge the assembly apart with a pry bar without success. I finally gave up before I got too frustrated, and would break something. Looking ahead, how do I assemble the socket onto the ball at the end of the wiper motor. I don't see much room to get my hands in the cramped space to do anything. With almost daily rain here in the midwest these days, going without wipers is a real pita. Rain-X only works well if going 50 mph+. Thanks for any advise....................Rooster2 Link to comment Share on other sites More sharing options...
Fairtax4me Posted July 11, 2015 Share Posted July 11, 2015 Pry bar or a big screwdriver. They're just really tight. Usually takes a pair of channel lock pliers to get them put back together. 1 Link to comment Share on other sites More sharing options...
Rooster2 Posted July 11, 2015 Author Share Posted July 11, 2015 Pry bar or a big screwdriver. They're just really tight. Usually takes a pair of channel lock pliers to get them put back together. Thanks Fairtax for the advise. I appreciate it. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now