bmxer507 Posted July 18, 2015 Share Posted July 18, 2015 does anyone know of any way to make my legacy outback from all wheel drive to front wheel drive. i have seen the fuse and all for the automatic only trans. i have a manual 5 speed transmission. help me please ive tried removing the rear cvs but all that did was loose all the power. i need front wheel drive for a flat track race so if anyone can help me that would be great. Link to comment Share on other sites More sharing options...
bmxer507 Posted July 18, 2015 Author Share Posted July 18, 2015 ive got like 5 days till the event and could reallyuse the help Link to comment Share on other sites More sharing options...
86BRATMAN Posted July 18, 2015 Share Posted July 18, 2015 http://www.914world.com/bbs2/index.php?showtopic=104513 Link to comment Share on other sites More sharing options...
Fairtax4me Posted July 18, 2015 Share Posted July 18, 2015 Weld the center diff, or just weld the pinion shaft to the counter shaft. Then plug the hole where the rear driveshaft goes in. Link to comment Share on other sites More sharing options...
bmxer507 Posted July 19, 2015 Author Share Posted July 19, 2015 Is there a way to do this with out having to weld it. I don't have the time to pull the center diff and have it welded could I weld the rear drive shaft in place and do almost the same thing Link to comment Share on other sites More sharing options...
johnceggleston Posted July 19, 2015 Share Posted July 19, 2015 no, not on the manual trans. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now