MR_Loyale Posted July 29, 2015 Share Posted July 29, 2015 I have a 2 inch lift that I have yet to install. First I need to do the 6 lug redrill of the hubs so I can use a 15" wheel. My question is that I am looking to use the BFG LT235/75R15/C 104 Q on a 15" wheel. http://www.bfgoodrichtires.com/tire-selector/category/off-road-tires/mud-terrain-t-a-km2/tire-details Will there be enough room to get these tires in there? How do I measure this? Link to comment Share on other sites More sharing options...
turbosubarubrat Posted July 29, 2015 Share Posted July 29, 2015 I'm running that size on my hatch with a 6" lift they're about a 29" tire http://tire-size-conversion.com/tire-size-comparison/. If you get them to fit with a 2" you will have to cut the fenders and fenders wells quite a little bit. Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted July 30, 2015 Share Posted July 30, 2015 Too big for a 2" lift find some 27" tires Link to comment Share on other sites More sharing options...
MR_Loyale Posted July 30, 2015 Author Share Posted July 30, 2015 (edited) I am really keen on that specific tire (BFG TA KM2). Would a 4" lift work? Or would I have to go to a 6" lift? I could go down to a LT215/75R15/C 100 Q. It says the diameter of that one is 27.9". http://www.bfgoodrichtires.com/tire-selector/category/off-road-tires/mud-terrain-t-a-km2/tire-details Edited July 30, 2015 by MR_Loyale Link to comment Share on other sites More sharing options...
turbosubarubrat Posted July 30, 2015 Share Posted July 30, 2015 I would just go with the 6" for the 235/75/15's. You could probably make them fit with a 4" but a lot of cutting and bashing. Hes a thread to look at for a better idea http://www.ultimatesubaru.org/forum/topic/113949-lift-and-tire-size-combo-pics/ Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now