Jump to content
Ultimate Subaru Message Board

Need recommendation for aftermarket wheel bearings 2005 OB


Recommended Posts

SOA quoting $109 rear and $198 front hub/wheel bearing.

I see a number of online suppliers selling them in the $50-60 range.

Fair amount of labor and more important dirty job so would prefer some longevity.

Any recommendations welcome.

Edited by brus brother
Link to comment
Share on other sites

I've had good luck with Beck Arnley bearings. Ordered a set of B/A rear bearings for my 95 fwd and they were reboxed Subaru parts, complete with Fuji check logo on the hub. Ymmv

 

Timken makes decent bearings.

Not as good as SKF or NSK, but Timken doesn't cost as much either.

 

The really cheapos, partsmaster, FEQ, drivewrong. Made in China stuff won't last as far as you can throw it.

  • Like 1
Link to comment
Share on other sites

Well it looks like SubaruPartsForYou.com which is online but local to me has the genuine parts for the rear bearing for less than the Beck and Arnley. So I guess I'll go genuine for that.

For those trying to save a few bucks, does it make sense to replace just the bearing or if paying someone to do the job, labor wise,  just bolt on the new assembly.

I was googling around before I came across the hub/bearing assembly and found a clever youtube video "pressing" a bearing in without a press. Basically put the hub in an oven, put the bearing in a freezer and then once at altered temps and shrinkage/expansion has been achieved, you can just drop the bearing into the hub.

 Start viewing at 8:42 where the fun begins. Wonder if the grease is affected as the temperatures reach equilibrium.

Oh well, not for the feint of heart or those whose wife wouldn't let you muck up the oven.

Link to comment
Share on other sites

fairly common to use hot and cold, i've used the freezer many times on bearings.

 

separating the hub from bearing and races getting stuck - it's not a fun job if you get a tricky one.  sure if it all goes easy and cake...but in the rust belt how dependable is that?  it's not something i'd let someone borrow my tools for because i know more often than not i'd just be doing it in the end.

Link to comment
Share on other sites

oops sorry i missed the details. 2005 OB. rear is worse than front but was pricing it out in case i did both. search at Advance Auto brought up bearings as well as hub/bearing combo. if i go with the combo i will monkey around with the heat and cold method on the old one. as i mentioned the price of soa is better than BeckArnley. fronts are pricey with either.

Link to comment
Share on other sites

Thanks for the research FT4

Agreed about the bearing appearance as n/a to my project.

Still puzzled why SOA has such a spread where the fronts are way more than the rear (F- 198 R-109) as compared to B/A (F-80 R-94)

I'll post back when the project is done and the growling beast tamed.

Edited by brus brother
Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...