SubaruJawn Posted August 22, 2015 Share Posted August 22, 2015 (edited) Hey Guys & Gals i recently got a 2001 impreza L Wagon AWD.2.2L Automatic 316,065 miles when bought, she has an issue running, cylinder 1 doesnt fire, previous owner said he bought it that way and has driven it for a year. i paid $250 for it and inspected till december, i would like to get her running properly father thinks its a burnt or bent valve.. because i get 30 psi 60 at best cylinder 3 gets 150psi runs on the same cam.. i was also told timing could do this as well, just a few teeth off can cause it.. what do you guys think ? EDIT: Edited August 23, 2015 by SubaruJawn Link to comment Share on other sites More sharing options...
SubaruJawn Posted August 22, 2015 Author Share Posted August 22, 2015 after testing and checking timing, i am convinced its the valve.. put air into cylinder 1 and the air came out the exhaust just as fast as it went in.. so i need valves, another question is the EJ222 a 16 valve ? i need 2 intake and 2 exhaust valves ? Link to comment Share on other sites More sharing options...
bratman18 Posted August 22, 2015 Share Posted August 22, 2015 Yes it's a 16v. Either replace the valves and have the head machined to accept new valves, or just put a good phase 2 2.2 head on it. Link to comment Share on other sites More sharing options...
SubaruJawn Posted August 22, 2015 Author Share Posted August 22, 2015 well if i change the head i'd like to do both and make her a dual port, is their dual port heads i can install on my EJ222 ? Link to comment Share on other sites More sharing options...
bratman18 Posted August 22, 2015 Share Posted August 22, 2015 Yeah phase 2 2.5 heads will go right on and won't be much different at all. The phase 2 heads are almost identical. 1 Link to comment Share on other sites More sharing options...
SubaruJawn Posted August 22, 2015 Author Share Posted August 22, 2015 Yeah phase 2 2.5 heads will go right on and won't be much different at all. The phase 2 heads are almost identical. what model and year has phase 2 ? the impreza rs 2.5L ? Link to comment Share on other sites More sharing options...
bratman18 Posted August 23, 2015 Share Posted August 23, 2015 what model and year has phase 2 ? the impreza rs 2.5L ? Sohc 2.5 I know that 99-02 would fit for sure. Probably a few other years as well. 1 Link to comment Share on other sites More sharing options...
SubaruJawn Posted August 23, 2015 Author Share Posted August 23, 2015 ok cool and i would still have the same power ? or more ? Link to comment Share on other sites More sharing options...
bratman18 Posted August 23, 2015 Share Posted August 23, 2015 ok cool and i would still have the same power ? or more ? Probably be about the same. Link to comment Share on other sites More sharing options...
SubaruJawn Posted August 23, 2015 Author Share Posted August 23, 2015 ok, now i am confused, Justin from Facebook sais the heads are nowhere near identical and sais the heads will cause a powerloss.. and i'd have to use EJ22 gaskets (kinda obvious) Quote: I wouldnt.... the bore of the 22 will leave a sharp edge that will stickout into the combustion chamber and collect carbon that will eventuallyhotspot and cause detonation. You'll also lower the compression (notsomething you want to do on an engine that's gutless down low to beginwith) Link to comment Share on other sites More sharing options...
bratman18 Posted August 23, 2015 Share Posted August 23, 2015 It's been done before. Many times. The phase 2 heads are almost the same. The phase 1 heads are very different. Sohc vs. DOHC, along with the use of a different intake manifold. There are many turbo builds built that way with no issues. So slapping phase 2 w.5 heads onto a 2.2 shouldn't cause much issue at, considering how similar they are. 1 Link to comment Share on other sites More sharing options...
SubaruJawn Posted August 23, 2015 Author Share Posted August 23, 2015 ok, i might get a set for $100 from a friend.. intake is different ? i know header would be and i have a stainless in the garage... Link to comment Share on other sites More sharing options...
bratman18 Posted August 23, 2015 Share Posted August 23, 2015 Intake will bolt right on. There's a chance you'll have to swap over the cam gears and crank sprocket from the 2.2 heads. I can't remember for sure. Link to comment Share on other sites More sharing options...
SubaruJawn Posted August 23, 2015 Author Share Posted August 23, 2015 Intake will bolt right on. There's a chance you'll have to swap over the cam gears and crank sprocket from the 2.2 heads. I can't remember for sure. ok, well great... i guess i will find out when i get them.. Link to comment Share on other sites More sharing options...
SubaruJawn Posted September 5, 2015 Author Share Posted September 5, 2015 ok, now that i have gotten work done to my impreza its time to share what i have found out.. it was indeed a bad valvem the rear main was leaking as well i niw have fixed the rear main seal.. i yet have to wait for the new headgaskets Leaking Seal: New Seal: Head with Bad Valve: 2.5L Heads: yet to installed 2.5 heads i am waiting on the headgaskets to arrive. Link to comment Share on other sites More sharing options...
SubaruJawn Posted September 10, 2015 Author Share Posted September 10, 2015 ok so i got my 2.2l back in my impreza all hooked up and running, but not very good.. cylinders 2 and 3 are not firing but has 150psi gets fuel and spark Link to comment Share on other sites More sharing options...
bratman18 Posted September 10, 2015 Share Posted September 10, 2015 Did you swap your cam pulleys over from the 2.2? I think they're different between the 2.2 and 2.5 Link to comment Share on other sites More sharing options...
SubaruJawn Posted September 11, 2015 Author Share Posted September 11, 2015 Did you swap your cam pulleys over from the 2.2? I think they're different between the 2.2 and 2.5 no i didnt.. i used 2.5's why would it make a difference ? they are 2.5 heads.. Link to comment Share on other sites More sharing options...
SubaruJawn Posted September 12, 2015 Author Share Posted September 12, 2015 (edited) ok so my buddy i got the heads off of explained to me why the pulleys are different, with that said i took them off and sure enough.. the rear is different which the sensor reads. 2.5L on the left and 2.2L on the right poor girl till waiting.. Edited September 12, 2015 by SubaruJawn Link to comment Share on other sites More sharing options...
bratman18 Posted September 13, 2015 Share Posted September 13, 2015 There ya go. Sorry I didn't reply sooner. Link to comment Share on other sites More sharing options...
SubaruJawn Posted September 14, 2015 Author Share Posted September 14, 2015 still not running, though.. damn threads stripped out of the timing tenstion bolt hole... gotta get helicoils.. Link to comment Share on other sites More sharing options...
SubaruJawn Posted September 15, 2015 Author Share Posted September 15, 2015 alright, cam pully changed stripped thread reapired... snd the result is... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now