Ashwell Posted August 22, 2015 Share Posted August 22, 2015 (edited) so i am about to do a 2'' lift on my 1990 subaru loyale and was wondering what will be the biggest tire i can through under it? i am planning on drillin the hubs to 6 lug bolt pattern and just wondering what combinations you guys have done? Or if i should even redrill my hubs im just trying to figure out what i should do wheel and tire wise. Edited August 22, 2015 by Ashwell Link to comment Share on other sites More sharing options...
Prwa101 Posted August 22, 2015 Share Posted August 22, 2015 Without cuttin to much a 27x8.5 works pretty well Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted August 22, 2015 Share Posted August 22, 2015 you can redrill the 6 bolt rims to 4 bolt or redrill the hubs to 6 bolt Ive done both with good results, either way you use 2 of the original holes, I can do your hubs at my shop , 26" on the 2" lift Link to comment Share on other sites More sharing options...
Ashwell Posted August 23, 2015 Author Share Posted August 23, 2015 how would i know where to exacty drill the rims? i see people doing it but i am not quite sure how exatly to do it? and thx for responding! Link to comment Share on other sites More sharing options...
Prwa101 Posted August 23, 2015 Share Posted August 23, 2015 here's a good video on how to drill the hubs. Now to drill the rims, punch 2 studs out of a hub and bolt it up to the 6 lug wheel and punch the centers through the hub onto the rim. Then drill the 2 holes in the rim. For those 2 hold its best to flip your nut over because more of the steel wheels have a slight ( to them. It help the nut sit better flush with the rim. 2 Link to comment Share on other sites More sharing options...
Ashwell Posted August 23, 2015 Author Share Posted August 23, 2015 ok thank you that helped alot! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now