machineit Posted April 6, 2016 Share Posted April 6, 2016 I like it man, great job on everything! 1 Link to comment Share on other sites More sharing options...
bratman18 Posted April 7, 2016 Share Posted April 7, 2016 I have a friend that did a similar turbo swap on the same engine. He used a td04, and 06 WRX intercooler as well. but it's mostly bolt on stuff, and a few hoses etc. Looks good! Link to comment Share on other sites More sharing options...
obk25xt Posted April 13, 2016 Author Share Posted April 13, 2016 (edited) Getting a lil ancy about the race this weekend… Hope the car does well. It's been a major headache! Engine out, engine in, engine out for hg's, stripped head bolt hole, no way to re-thread hole, running out of options, tapped hole to 1/2x20, used a 7.5" bolt to fasten head to block, fingers crossed it will hold long enough to make all my runs!! The car is running real good, the turbo adds quite a bit of power! Boost is almost immediate, and its still plenty torquey. Tomorrow is crunch time for packing up and being ready to roll out EARLY thurs morn. I'm bringing 2 spare axles, 2 spare ball joints, way too many tires, and a bag of tools. I just hope all my bases are covered, its a LONG way to drive with so many iffy circumstances! Got some numbers on and all fresh fluids/filters… Heres a pic of my custom head bolt job. I ran a die nut down the bolt to make the threaded section longer, and clearances a washer to fit the contour of the valve cover. It is working… If I had to do it again, I would shorten the bolt by about 1/2", I didn't have a bottom tap so the threads are tapered near the bottom of the hole. It felt like the bolt bottomed out. Rather than risk ruining the hole again, I just decided to risk it… So far so good…..All ready to rock!NUMBERS!!! Edited April 13, 2016 by obk25xt 1 Link to comment Share on other sites More sharing options...
D3F0 Posted April 15, 2016 Share Posted April 15, 2016 How much Boost are pushing through that baby snail. I love those ej22Es so dam reliable. Good fix with the head bolt/stud issue, it really does suck when Subarus fight back. 1 Link to comment Share on other sites More sharing options...
obk25xt Posted April 19, 2016 Author Share Posted April 19, 2016 (edited) How much Boost are pushing through that baby snail. I love those ej22Es so dam reliable. Good fix with the head bolt/stud issue, it really does suck when Subarus fight back. The baby snail is running direct wastegate boost, which is 5psi. Car ran GREAT at nationals. Placed 11th of 19 in modified. There were some fast cars and tough competition! Totally satisfied, it was a blast. Learned some stuff, met some awesome people, total success…. Didn't get many pics at the event, there was a lot going on... Edited April 19, 2016 by obk25xt Link to comment Share on other sites More sharing options...
D3F0 Posted April 20, 2016 Share Posted April 20, 2016 Thats just lovely, sounds and looks like a great time! 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now