padave Posted October 8, 2015 Share Posted October 8, 2015 Hi All, New member. I have a hateful abs problem. I pulled the codes from the abs as a bad sensor for left front. I have confirmed this several times. I ordered a new sensor and it does not fit. The old sensor is hexagonal and the new one is round. I am actually stuck with a round peg "square" hole scenario. I contact Subaru Parts warehouse and they confirmed it is the part for the car. The old part no. matches except the last digit and I was told that was because of progression not a different part. I will list the parts. A2 26740AA010 - old part A2 26740AA011 - new part Any help would be appreciated. Dave Link to comment Share on other sites More sharing options...
Bushwick Posted October 8, 2015 Share Posted October 8, 2015 Fairtax should have an answer for you as he's pretty much a guru here and knows the ABS stuff. Did you actually try and install it? Or are you going solely off the appearance? Link to comment Share on other sites More sharing options...
padave Posted October 8, 2015 Author Share Posted October 8, 2015 No, I removed the old one which was about 3 Hrs and a lot of panther piss. It came out literally a thousandth at a time. The inside of the hole was hexagonal and the new part would not even start into the hole. I am fighting with it now. I decided that the hole had to be "grown" to the old sensor. I stuck a large chisel into the hole and turned it with a wrench until chunks flew. It would appear the hole had grown shut. I have reamed it out with chisels and emery cloth. I stopped for lunch but the new one may go into the hole soon. I'll let you know. That's the way it always works for me. Someone else can bring me their car and it takes 1 hr to change both of the rear wheel hubs and mine will take weeks with copious amounts of cursing and panther piss. Just the way it is. Dave Link to comment Share on other sites More sharing options...
idosubaru Posted October 8, 2015 Share Posted October 8, 2015 It does look like that's a superceded part number, but there's some confusing antics to how it's listed too... Can you post a picture? What's the difference - the connector or shape of the sensor? what's preventing it from working? I have a set of new Subaru ABS sensors at home that are think are for your vehicle. - I can post pictures tomorrow and ship it to you for half price if it's the right part. Link to comment Share on other sites More sharing options...
idosubaru Posted October 8, 2015 Share Posted October 8, 2015 oh wow, rust strikes again. i've had ABS sensors shear off, i'm surprised the bolt came out if it's that bad. next time you need a Subaru - seriously buy an oldie but goodie from out west/down south and you'll be amazed. subaru reliable and easy to maintain, no rust. i bought two XT6's from out west and i must be one of two people in WV with 1980's rust free Subaru's with original exhaust that are a breeze to work on. Link to comment Share on other sites More sharing options...
padave Posted October 9, 2015 Author Share Posted October 9, 2015 oh wow, rust strikes again. i've had ABS sensors shear off, i'm surprised the bolt came out if it's that bad. next time you need a Subaru - seriously buy an oldie but goodie from out west/down south and you'll be amazed. subaru reliable and easy to maintain, no rust. i bought two XT6's from out west and i must be one of two people in WV with 1980's rust free Subaru's with original exhaust that are a breeze to work on. I've had this car for almost 8 yrs. Almost no trouble with it other than wear items. I did get it done. a lot of running the dremmel and a bunch of cursing. I could hardly believe my eyes. Thanks for the input it was appreciated. Dave Link to comment Share on other sites More sharing options...
Fairtax4me Posted October 9, 2015 Share Posted October 9, 2015 Yeahp, rust grows in the knuckle and crushes the sensor housing. Have seen it quite a few times on these. Scrape all the rust and scale out and load up inside the hole with anti-seize. Link to comment Share on other sites More sharing options...
Bushwick Posted October 10, 2015 Share Posted October 10, 2015 I'm glad you posted this as I have an ABS sensor issue on my 95' that's been put off and this sounds like it'll be an issue with it too. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now