jdgmbi1 Posted November 17, 2015 Share Posted November 17, 2015 Iv been looking around done my research but its not adding up I have rust under my rear window gasket and I can't seem to find anything anywhere. I even looked on goolge Japan and nothing came up still. I desperately need advice I'm using my mom's Tahoe while she's gone for the week on a trip soit leaves my dad and I some to get stuff done and it happend to be that I just stumbled across this thinking before hahaha my sylicon idea worked so I left it out and we had a typical Washington rain for litterly 18 hours...I was sorta worried and went to check in it and there was a pool in my trunk. Bottom line I need a gasket. Reaaaaly badly. The pictures below are over sprayed with some protection rust stuff that dad told me to use. So the rust holes are underneath the gasket itself. Thanks in advance, Ben Link to comment Share on other sites More sharing options...
hatchsub Posted November 17, 2015 Share Posted November 17, 2015 (edited) A 5 minute search yielded this thread of mine from years ago. The name of the place is Phils rotary products. Make sure to talk to them on the phone and email them a picture or two of your car. They got me the wrong gaskets a few time before they sent the right ones. They are good quality however. http://www.ultimatesubaru.org/forum/topic/106401-what-are-my-options-windshieldrear-window-seal/?hl=%2Bcoupe+%2Bwindow+%2Bgaskets&do=findComment&comment=897808 Edited November 17, 2015 by hatchsub Link to comment Share on other sites More sharing options...
jdgmbi1 Posted November 17, 2015 Author Share Posted November 17, 2015 okay cool thanks i'll take a look and see if anything is still there, if not ill get back to you. Link to comment Share on other sites More sharing options...
jdgmbi1 Posted November 18, 2015 Author Share Posted November 18, 2015 (edited) so it was not there any other ideas, places, or suggestions? : / Edited November 18, 2015 by jdgmbi1 Link to comment Share on other sites More sharing options...
hatchsub Posted November 18, 2015 Share Posted November 18, 2015 Do more searching. If you own that car now you will have to learn how to scour the internet for something stupid because there are not many coupes out there. I did a 1 minute google search of phils rotary in AU and came up with a phone number. Call them. https://www.google.com/#q=phils+rotary+in+australia Link to comment Share on other sites More sharing options...
BRG Posted November 18, 2015 Share Posted November 18, 2015 Subaru 4 door rear window (bottom) Dam Rubber 65046GA160 for some 1980 models NOS. In sealed package. Goes between channel and glass. Is this what you looking for? Bill Link to comment Share on other sites More sharing options...
jdgmbi1 Posted November 18, 2015 Author Share Posted November 18, 2015 (edited) mine is a 2 door sedan and its a 1984, but i don't know i'll do the measure it thanks. i must just suck at researching aha! ill also look at the site thank you. sorry for the hassle. Edited November 18, 2015 by jdgmbi1 Link to comment Share on other sites More sharing options...
hatchsub Posted November 19, 2015 Share Posted November 19, 2015 No it will not work. Coupes and sedans have different size windshields and rear windows. You need 2 door coupe gaskets. Link to comment Share on other sites More sharing options...
jdgmbi1 Posted November 20, 2015 Author Share Posted November 20, 2015 okay cool thanks man!! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now