Subasaurus Posted November 27, 2015 Share Posted November 27, 2015 For an EA-82, Non-Turbo SPFI. im pretty sure the top right one thats cardboard color is the EGR valve one, but i can't figure out what the 4 thick O rings go or that tiny O ring next to the 4 on the top left. theres also 2 blue ones which i assume something with water but can't figure it out, and the 2 on the bottom of the picture that are in pairs, im assuming intake but where? theres also a word bank that the package came with that i have provided, hopefully that helps also. and a picture of where im at currently, hopefully its not too late, i just closed up the valve covers, decided to ask here before i went any further with the rebuild. thanks for any info! Thanks again for your help! -Omar. Link to comment Share on other sites More sharing options...
ccrinc Posted November 27, 2015 Share Posted November 27, 2015 You're going to hate me, but that tiny o-ring is for the oil pick up tube in the oil pan. If the one you have now (assuming you have one) has even a nick in it, oil won't suction up into the engine. 4 thick ones - fuel injectors I'm not sure why you have MPFI intake and exhaust manifold gaskets for an SPFI, but that's what you have. I "think" the blue ones are for carburetor mounting: I don't "do" carburetors. That's a French word meaning "leave it alone". Emily 1 Link to comment Share on other sites More sharing options...
Subasaurus Posted November 27, 2015 Author Share Posted November 27, 2015 (edited) thanks for clearing that up, the only screw up was the oil pan, gotta remove it and put some RTV on it again, besides that and the EGR, i guess the rest doesn't apply to me? including those 4 thick O rings since mines Single Point? Edited November 27, 2015 by Subasaurus Link to comment Share on other sites More sharing options...
DaveT Posted November 27, 2015 Share Posted November 27, 2015 If it's a fel pro kit, they include all of the gaskets for the different similar engines. I have several sets of MPFI and other odd gaskets for engines I don't have laying around also. 1 Link to comment Share on other sites More sharing options...
Subasaurus Posted November 27, 2015 Author Share Posted November 27, 2015 yes its the Fel Pro box kit. its just that on the top of the box (not seen in the picture) it says for EA82 SPFI 1985-1994 Only. so thats why i was alittle confused about those that remained. wonder if the MPFI Only box comes with extra seals that are for SPFI Link to comment Share on other sites More sharing options...
DaveT Posted November 27, 2015 Share Posted November 27, 2015 hmmm, Not sure then. Maybe some other odd variant that I've not seen? 1 Link to comment Share on other sites More sharing options...
Subasaurus Posted November 27, 2015 Author Share Posted November 27, 2015 (edited) who knows, but as long as those don't apply to my engine, then im golden. thanks for the help Dave and Emily. Edited November 27, 2015 by Subasaurus 1 Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted November 27, 2015 Share Posted November 27, 2015 Long years ago, I obtained an Original seal kit for the EA82 at the Local (defunct) Subaru Dealer, and I saved the list included in the Box, which I share here with you, for comparison purposes only, it has each part's Number as well, which might be useful: Kind Regards. 2 Link to comment Share on other sites More sharing options...
Subasaurus Posted November 27, 2015 Author Share Posted November 27, 2015 (edited) thanks for sharing that Jeszek, will definetly save that as Subaru has probably already deleted these from their computer files as obsolete. so whatever remains out there in hardcopy service books or saved images like you have done, is all we have left, thank you. Edited November 27, 2015 by Subasaurus 1 Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted November 27, 2015 Share Posted November 27, 2015 You're Welcome! Let us know how your engine goes... Kind Regards. 2 Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted November 27, 2015 Share Posted November 27, 2015 I understand this: ... I don't "do" carburetors. That's a French word meaning "leave it alone" ... After dealing with many annoying carburetors, I am getting tired of working on them... unless they're Webers! ... ... Kind Regards. Link to comment Share on other sites More sharing options...
zmarrott Posted November 27, 2015 Share Posted November 27, 2015 Im pretty sure the small blue one is the oil filler tube gasket. Looks very similar to the one on my ea81 i did. Other one may just be a same thing on a different engine Link to comment Share on other sites More sharing options...
Subasaurus Posted November 27, 2015 Author Share Posted November 27, 2015 all the gaskets that have been blue are for water purposes so far in the kit, so i doubt it but i woun't know till i remove the oil pick up tube.. Link to comment Share on other sites More sharing options...
ccrinc Posted November 27, 2015 Share Posted November 27, 2015 thanks for clearing that up, the only screw up was the oil pan, gotta remove it and put some RTV on it again, besides that and the EGR, i guess the rest doesn't apply to me? including those 4 thick O rings since mines Single Point? FYI, that oil pan is supposed to have a gasket, not RTV (which is a royal PITA). They are available at NAPA for a moderate price. Make sure you get one for the right year, they are famous for trying to give EA81 pan gaskets instead. Link to comment Share on other sites More sharing options...
-tombba- Posted November 28, 2015 Share Posted November 28, 2015 Those two blue gaskets are for the cast aluminum water transfer pipe (if I remember correctly) that is part of the intake manifold in mpfi engine. It bolts to the rear side of the manifold and houses ect sensor and transfers coolant between the heads. 1 Link to comment Share on other sites More sharing options...
Subasaurus Posted November 28, 2015 Author Share Posted November 28, 2015 Those two blue gaskets are for the cast aluminum water transfer pipe (if I remember correctly) that is part of the intake manifold in mpfi engine. It bolts to the rear side of the manifold and houses ect sensor and transfers coolant between the heads.thanks for clearing that up where those go exactly Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now