warmblood58 Posted December 4, 2015 Share Posted December 4, 2015 Hello All, I have my intake off and while it is off, I wanted to reseal injectors and some of the reference articles I have read make it sound difficult. I am less concerned about removal but more about finding the correct o rings - anyone have a source with sizes or just sizes?. My injectors are black. the orings for the rail to manifold should be replaced too - anyone know the correct sizes for these as well? BIG THANKS! Link to comment Share on other sites More sharing options...
john in KY Posted December 4, 2015 Share Posted December 4, 2015 Always the dealer but the last time I did this job, just took an injector to the local NAPA dealer where the correct size was matched from a box of many different sizes. Link to comment Share on other sites More sharing options...
ocei77 Posted December 4, 2015 Share Posted December 4, 2015 Injectors are easy to replace in car. The large fat ones that go into the manifold would be hard to get from anyone but an online store or dealer. I'd reinstall the originals,then get what you need, unless you can deal with the down time. O. Link to comment Share on other sites More sharing options...
mikaleda Posted December 5, 2015 Share Posted December 5, 2015 I bought a kit at my local auto parts store Link to comment Share on other sites More sharing options...
ocei77 Posted December 6, 2015 Share Posted December 6, 2015 ^ good to know! O. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now