rae houghton Posted December 21, 2015 Author Share Posted December 21, 2015 Hey Dave T ....if you type in GLITCH IN BALL JOINT REPAIR..... but make sure it is clicked on 'forums' and not 'this forum' ...you should get it. Rae Link to comment Share on other sites More sharing options...
idosubaru Posted December 21, 2015 Share Posted December 21, 2015 is that a Subaru manual or something else? why doesn't it show a clip on that boot - does the oring replace the clip or it's in addition to it? EA82 XT's don't have an oring there. but it's a rather benign oring - get an automotive grade oring sized to match at any auto parts store - they have bins of them they can match to size. even if they have standard sizes there will be one suitable for a metric oring. Link to comment Share on other sites More sharing options...
DaveT Posted December 22, 2015 Share Posted December 22, 2015 Sounds like you got things back together. Something is very wrong if you have to drive a roll pin with much more than moderate firm tapping... There are very few things to use the "get a bigger hammer" technique on with these cars, and those are usually last ditch destructive disassembly. 6 point sockets - good ones - help a lot with these old stuck bolts. The o ring can be used like an elastic to help hold the end closed / in place. But all of the ones I remember seeing have steel spring clips holding the boot. Link to comment Share on other sites More sharing options...
rae houghton Posted December 23, 2015 Author Share Posted December 23, 2015 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now