98 legacy outback tranny trouble

[stngllhm]

I have a 1998 legacy outback with a 4 speed automatic transmission that the front differential went out. I am not able to find a new ring and pinion gear which are the parts needed. I am looking for a ring and pinion or whole transmission if one can be found. My next question is i have found two 2000 outback models with good transmissions. Can the two of these transmissions be interchanged with each other? Thank you for any help that can be provided to me.

Mark Cornett

[porcupine73]

I do not believe those will interchange. 2000 Outback would be an early 4eat phase II (with the external spin on filter). I believe all '98 Outbacks had the 4eat phase I. Obviously if you do replace the trans the ratio has to match the existing trans ratio (or have to get the matching rear diff as well).

[johnceggleston]

the labot to swap the ring and pinion is not minor.

plus, you have to know what you are doing to set the ring gear correctly.

you have to make adjustments at the axle stubs on each side of the trans.

 

it is way easier to replace the whole trans.

and probably more sure of long term reliability.

 

look for a trans at www.car-part.com

sort by zip to see what is close.

you can use ANY auto trans 96 - 98 from an ej25 car,

outback, forester, GT, or LSi, in that order. (the GT and LSi will throw off the speedo slightly.)

you will likely have to search each year separately.

 

or if you are close to VA,

i have a factory rebuilt auto trans from a 98 outback.

ran fine when crashed.

there is a metal rebuilt mileage / date tag on the trans,

but  i can't read it.

Edited January 5, 2016 by johnceggleston