mm88swrt Posted January 17, 2016 Share Posted January 17, 2016 So I got the larger legacy master cylinder for a 94. Impulse ebay buy! And upon looking at my car today I am assuming I need to use all 4 outlet ports as my stock one. The legacy mc I got only has 2 ouputs. Anyone know exactly which one I need? All in able to find right now is legacy mc with the two outputs!!! I'm putting my impress knuckles one and TEIN suspension and next is the etc brakes. So I want to try and source the correct mc soon! Link to comment Share on other sites More sharing options...
crazyhorse001 Posted January 17, 2016 Share Posted January 17, 2016 Fwd svx is 4 port large diameter, and should fit with a little modification. Link to comment Share on other sites More sharing options...
Numbchux Posted January 17, 2016 Share Posted January 17, 2016 Or, go to your local auto parts store, and get 2 of these. M10x1.0 inverted flare tee fittings, you'll also need a couple short lengths of brake line with the same fittings to go between the master and the tee. The 2-port masters are for ABS. And the ABS pump splits the pressure from 2 lines to 4. Just make sure to keep the front and rear connections oriented the same as they were. The primary and secondary pistons (front and rear) within the master are what allow you to have some braking force, should you have catastrophic hydraulic failure somewhere. Link to comment Share on other sites More sharing options...
D3F0 Posted January 18, 2016 Share Posted January 18, 2016 I am swapping a 97 SVX ABS master cylinder into my 88 RX. I had one laying around and couldnt help but do it after reading this haha. Link to comment Share on other sites More sharing options...
mm88swrt Posted January 18, 2016 Author Share Posted January 18, 2016 Thanks for the responses. I'm going to try and source a mc with the 4 ports. Of not I'll probably go with the t fitting direction. With upgrading my whole brake system I want to move a little more volume! Link to comment Share on other sites More sharing options...
D3F0 Posted January 18, 2016 Share Posted January 18, 2016 I have an extra one with two port for sale if you are interested. I part SVXs out I even have all the lines still hooked up haha Link to comment Share on other sites More sharing options...
mm88swrt Posted January 19, 2016 Author Share Posted January 19, 2016 I have an extra one with two port for sale if you are interested. I part SVXs out I even have all the lines still hooked up haha I've got a new legacy two port right now. I think I'll pass and try to track down the 4 port. Thanks though! 1 Link to comment Share on other sites More sharing options...
Caboobaroo Posted January 19, 2016 Share Posted January 19, 2016 I ended up with a FWD 92-95 SVX non ABS master cylinder that is a 1 1/16th" bore diameter. Since I grabbed a new Centric brand, it also came with the resevoir. I have yet to swap it as the XT6 has been pushed to the back burner for the winter, again... Link to comment Share on other sites More sharing options...
mm88swrt Posted January 19, 2016 Author Share Posted January 19, 2016 I ended up with a FWD 92-95 SVX non ABS master cylinder that is a 1 1/16th" bore diameter. Since I grabbed a new Centric brand, it also came with the resevoir. I have yet to swap it as the XT6 has been pushed to the back burner for the winter, again... I've decided not to put my gl-10 on the back burner this year! It's sat in the shop way to long. I ended up with a 94 legacy abs mc also centric new with resivior. But only the two ports and it's a 1" bore. Where did you get yours? Link to comment Share on other sites More sharing options...
Numbchux Posted January 19, 2016 Share Posted January 19, 2016 http://www.ultimatesubaru.org/forum/topic/157224-i-just-upgraded-my-master-cylinderheres-what-i-found/ Link to comment Share on other sites More sharing options...
carfreak85 Posted March 1, 2019 Share Posted March 1, 2019 On 1/19/2016 at 2:23 PM, Numbchux said: http://www.ultimatesubaru.org/forum/topic/157224-i-just-upgraded-my-master-cylinderheres-what-i-found/ Out of production.... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now