kirzick Posted January 17, 2016 Share Posted January 17, 2016 (edited) Hey all! Happy new year. Recently the ignition switch in my 84 Gl started acting really funky. When the key is turned to the off position, the car thinks its on and will even run in this position. One click past off, the starter will engage. This is very annoying, as to turn the car off now i have to put it in accessory and disconnect the battery. Any suggestions? Thanks all! Edited January 17, 2016 by kirzick Link to comment Share on other sites More sharing options...
naru Posted January 17, 2016 Share Posted January 17, 2016 Get a new switch. Link to comment Share on other sites More sharing options...
SuperBrat Posted January 17, 2016 Share Posted January 17, 2016 The slotted hole plastic piece that goes to the back of switch is probably worn and starting to round out Link to comment Share on other sites More sharing options...
wagonist Posted January 17, 2016 Share Posted January 17, 2016 Have you pulled the steering column surround off & unscrewed the switch from the ignition barrel to check whether anything is broken? Link to comment Share on other sites More sharing options...
Indrid cold Posted January 18, 2016 Share Posted January 18, 2016 I would shoot some silicone spray in the switch, possibly cut a new key. Look at Rock Auto .com for replacement. I bought mine there. I think. Been years. Link to comment Share on other sites More sharing options...
comatosellama Posted January 21, 2016 Share Posted January 21, 2016 (edited) I would shoot some silicone spray in the switch, possibly cut a new key. Look at Rock Auto .com for replacement. I bought mine there. I think. Been years. Don't do silicone spray, WD40 would be the better option. According to Subaru silicone spray will degrade (or something like that) under voltage and cause crappy connections. http://www.subaruoutback.org/forums/66-problems-maintenance/41143-silicone-containing-sprays-lead-electrical-contact-problems.html Edited January 21, 2016 by comatosellama Link to comment Share on other sites More sharing options...
roadsubiedog Posted January 21, 2016 Share Posted January 21, 2016 worn switch probably. there is a video on you tube on replacing switch. took me about an hour and i never did one before. Link to comment Share on other sites More sharing options...
kirzick Posted January 30, 2016 Author Share Posted January 30, 2016 (edited) Thank you for the replys everyone. I pulled the plastic off the bottom of the steering column. The pink plug for the ignition switch had melted internally, causing some of the connectors to touch. I pryed them apart and that solved everything. I drove the car to work the other day, which is a 25 minute drive. I felt the pink plug after driving for about 20 minutes and it was very hot. It wasn't hot to the point that the plastic was melting,but probably close. What would cause this? Thanks all. Edited January 30, 2016 by kirzick Link to comment Share on other sites More sharing options...
DaveT Posted January 30, 2016 Share Posted January 30, 2016 The contacts on one or more of the circuits in the plug or socket lost the spring tension, and got slightly corroded which makes resistance. Current flowing makes heat, accelerating corrosion. Makes more heat, more corrosion. Also looses more tension from heat. Replace the bad pins and sockets. Link to comment Share on other sites More sharing options...
kirzick Posted January 30, 2016 Author Share Posted January 30, 2016 Okay will do, I'll probably swap out the whole plug. At least I own a good soldering gun now. Thank You Link to comment Share on other sites More sharing options...
DaveT Posted January 30, 2016 Share Posted January 30, 2016 Be sure to use same or thicker wire / connectors Link to comment Share on other sites More sharing options...
wagonist Posted January 30, 2016 Share Posted January 30, 2016 You should be able to buy the pins. I wouldn't cut and solder those wires, most of the car is running through them. Just pull the pins out of the plug, cut them off and crimp new pins on. You don't want the same problem again Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now