justinthesubie Posted February 1, 2016 Share Posted February 1, 2016 (edited) Hello fellas. I came across a engine with dual carburetors. I believe I have a ea81 built by nsi airplane company with the dual carburetor setup from a Japanese rx. I really need a vacuum diagram for the dual carburetor setup. If anyone can help me out it would be much appreciated. Thanks. Justin Edited February 1, 2016 by justinthesubie Link to comment Share on other sites More sharing options...
TOONGA Posted February 1, 2016 Share Posted February 1, 2016 I can find pictures but no FSM material sorry http://www.ultimatesubaru.org/forum/topic/110449-sourcing-parts-for-a-dual-carb-ea-81-updated/ http://offroadingsubarus.com/ea81dc/ I hope this helps TOONGA Link to comment Share on other sites More sharing options...
justinthesubie Posted February 1, 2016 Author Share Posted February 1, 2016 Yes. Thank you. More the merrier Link to comment Share on other sites More sharing options...
jono Posted February 1, 2016 Share Posted February 1, 2016 how many vacuum ports and devices have you got to deal with ? I think mine are very minimal such as for the vac advance and not much more from memory ?? Link to comment Share on other sites More sharing options...
justinthesubie Posted February 1, 2016 Author Share Posted February 1, 2016 Not really much there. Vac valve for the choke i think. Two other ones off of the carb just going nowhere. My choke linkage is not hooked up either. Trying to get pictures now Link to comment Share on other sites More sharing options...
justinthesubie Posted February 2, 2016 Author Share Posted February 2, 2016 (edited) After looking really close to the pictures given and my setup. I think I got it pretty close to what it should look like. It runs but the carburetors will probably need rebuilt. Very excited as this is the only one I had ever seen. Hadn't seen the nsi motor, then researched it online. Hadn't seen the dual carburetor setup, then researched it online. Lol. I got this setup in a car with a ton of other subie goodies. This is the only intake that fits this motor as well <iframe width="480" height="360" src="http://s149.photobucket.com/user/justinthesubie/embed/slideshow/Mobile%20Uploads"></iframe> Edited February 2, 2016 by justinthesubie Link to comment Share on other sites More sharing options...
hatchsub Posted February 5, 2016 Share Posted February 5, 2016 Wow pretty jealous of that. When i had a EA81 subaru i was looking for one of those motors. I must have looked for three or 4 years on and off and never did come across one that was accessible to me. Good luck with it. Link to comment Share on other sites More sharing options...
justinthesubie Posted February 5, 2016 Author Share Posted February 5, 2016 I can't wait. Should be a lot of fun to drive. Though it would be nice if it was a rx motor. But this one is supposed to have 108hp Link to comment Share on other sites More sharing options...
TomRhere Posted February 5, 2016 Share Posted February 5, 2016 Roughly speaking here, but 30 HP over a stock EA81 engine is nothing to complain about. I'd be "Happy" with it. 1 Link to comment Share on other sites More sharing options...
justinthesubie Posted February 6, 2016 Author Share Posted February 6, 2016 Oh yeah I'm stoked Link to comment Share on other sites More sharing options...
83leone Posted October 24, 2016 Share Posted October 24, 2016 (edited) I have the same setup in mine runs beautifully I'll snap some pictures of the carb setup to give ya something to go by for yours if you'd like. Edited October 24, 2016 by 83leone Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now