DLGL8388 Posted July 30, 2016 Share Posted July 30, 2016 If I want to swap to 5 lug from 4 lug on my 88 GL using Imprezza knuckles what else do I need besides the knuckles? Thanks. Link to comment Share on other sites More sharing options...
DLGL8388 Posted July 30, 2016 Share Posted July 30, 2016 Where can I get info on swapping in Imprezza knuckles to convert from 4 lug to 5 lug? Link to comment Share on other sites More sharing options...
dfoyl Posted July 30, 2016 Share Posted July 30, 2016 You also need the front struts, change the top hats across from your existing to the new struts. Modify the bottom arms. There are quite a few threads on it in the retrofitting section. For the rear you need XT6 hubs, and either XT6 backing plates and calipers, etc, or modify any EJ backing plate to fit (which is changing 4 holes to 3 to suit the trailing arm). See the thread I started on EOI for XT6 hubs, there is quite a bit of info on the backing plate work required. Link to comment Share on other sites More sharing options...
machineit Posted July 31, 2016 Share Posted July 31, 2016 I know a lot of us redrill to get bigger tires for offroading. I'm wondering if anyone has done this to get a more onroad performance type tire? I need to get the puny 13" wheels off my 87.5 XT GL. The main question i have is, how big in overall diameter/width can i go? I see some nice gm/toyota 17"&18" wheels out there for decent money. I know with 18"s i'd end up with like 30-35 series tires, but im ok with that. I also know from my FWD xt6 that 205/55-16 is at the max, but thats a different animal altogether. If anyone can help me out before i spend big $$$ on r&d I'd appreciate it! Link to comment Share on other sites More sharing options...
machineit Posted July 31, 2016 Share Posted July 31, 2016 (edited) content://media/external/file/11701 Not sure if it makes it, but lots of room to do whatever [/url Edited July 31, 2016 by machineit Link to comment Share on other sites More sharing options...
machineit Posted July 31, 2016 Share Posted July 31, 2016 URL=http://s1204.photobucket.com/user/kevinkirkland10/media/Mobile%20Uploads/0524161251a_zpsglo5lkte.jpg.html][/url 1 Link to comment Share on other sites More sharing options...
machineit Posted July 31, 2016 Share Posted July 31, 2016 (edited) Cost about $180 in studs and lugs just alone, next is having a budy to mill and [/url Edited July 31, 2016 by machineit 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now