All_talk Posted June 3, 2004 Share Posted June 3, 2004 The Shop behind my work is working on a Brat with an EJ, I could only get the hood up enough to recognize the intake runners (I dont know EJs well). I’m sure it’s a real tight fit, if anyone wants more info on it I’m sure I can get a closer look, maybe even chat with the owner, let me know. Gary Link to comment Share on other sites More sharing options...
MorganM Posted June 3, 2004 Share Posted June 3, 2004 yes yes! I'd like to know what he did for transmissions. Did he swap in the whole drive train or did he adapt the bellhousings to his old Brat tranny? Any cutting to make it fit? how about the main crossmember? Thx! Link to comment Share on other sites More sharing options...
All_talk Posted June 3, 2004 Author Share Posted June 3, 2004 LOL, that was quick, I figured there might be a little interest, I'll see what I can do, maybe get some pics. If I talk with the owner I'll suggest he join our little board and tell us all about it. Gary Link to comment Share on other sites More sharing options...
All_talk Posted June 3, 2004 Author Share Posted June 3, 2004 Just took a quick look under the hood, I don’t know how to tell one EJ from another so I cant say what size it is, its still in the project stage, looks like some wiring and shift linkage is wants left to do. Seems to fit well and the frame rails don’t appear to be modified, it has the EJ trans, couldn’t get a look at the main crossmember but mount under the trans looks to be based on a stock part, not hand made. I really don’t know the EA81/Brat stuff well enough to tell what’s been changed, one of the guys in the shop said “we had to do a s**t load of work under that thing”. I'll try to find out a bit more. Gary Link to comment Share on other sites More sharing options...
MorganM Posted June 4, 2004 Share Posted June 4, 2004 Awsome thanks for finding this stuff out. Could you ask what crossmember they used for engine and transmission. What rear diff they are using. What axles they are using or if they used DOJs from the donor and CVs from the Brat. Was the entire wire harness swaped over or just the computer and what they esentialy needed. How about clearance for radiator and fan up front. The engine stamp should be right up front dead center on top of the block. It will say EJ22 or whatever it is. Thx! Link to comment Share on other sites More sharing options...
Qman Posted June 4, 2004 Share Posted June 4, 2004 I heard he was building it. I can't remember his name but he owns this one too. He talked about it at WCSS5. Tom @ Aarons told me he had picked up the running gear from him. I think it is an EJ22 with the AWD system. If he puts as much love into this that he put into the Hatch it will be awesome. Link to comment Share on other sites More sharing options...
JRach Posted June 4, 2004 Share Posted June 4, 2004 I heard he was building it. I can't remember his name but he owns this one too. He talked about it at WCSS5. Tom @ Aarons told me he had picked up the running gear from him. I think it is an EJ22 with the AWD system. If he puts as much love into this that he put into the Hatch it will be awesome. I remember that hatch... You'd be hard pressed to find a car out of the factory with less dirt on it. Link to comment Share on other sites More sharing options...
baccaruda Posted June 4, 2004 Share Posted June 4, 2004 25 subaru points to anyone who can name all the oglers in that picture! Link to comment Share on other sites More sharing options...
MorganM Posted June 4, 2004 Share Posted June 4, 2004 I think it is an EJ22 with the AWD system. So axles, knuckles, control arms, struts etc adapted to fit in? Link to comment Share on other sites More sharing options...
carfreak85 Posted June 4, 2004 Share Posted June 4, 2004 Well, I see Corky for sure, but he's really hard to miss!!! Kust kidding Corky! Link to comment Share on other sites More sharing options...
NV Zeno Posted June 4, 2004 Share Posted June 4, 2004 Hey Corky, I think we deserve some sort of "appearance fee" for that one, yes:grin:? (I'm standing in front of the car in the hat) Link to comment Share on other sites More sharing options...
GeneralDisorder Posted June 4, 2004 Share Posted June 4, 2004 This actually doesn't appear to be all that difficult of a swap. You can order up some axles from CVAxles.com that will fit the trans so that's easy. The EJ22 is physically narrower than an EA82, so will fit in the frame rails no problem. All that's really left is to fab some mounts and strip the engine harness from a legacy. Some shift linkage and you are down the road. It's also been done both here in the states and in AUS. Even with Gen 1's.... the picture gallery has a number of examples.... Personally - if I'm going to do it, then I'm doing it with a legacy EJ22G and AWD 5 speed..... GD Link to comment Share on other sites More sharing options...
75skunkaroo Posted June 4, 2004 Share Posted June 4, 2004 legacy engine, i think, he's getting the cam work done at delta. last time i talked to him he was starting to get all of the computer and wiring stuff figured out. still trying to get him to drive his 'pavement queen' down here:rolleyes: oh, BTW his name is bob b. -mike Link to comment Share on other sites More sharing options...
Jibs Posted June 5, 2004 Share Posted June 5, 2004 Is it harder to fit an ER27 into a brat than an EJ22? Just wondering. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted June 5, 2004 Share Posted June 5, 2004 MUCH harder. Engine is wider, and longer. Frame rails have to be modified, and the radiator has to be moved. EJ22 requires no frame rail mods, and relocation of the radiator is not needed (although an EJ radiator ought to be fitted I'm assuming). GD Link to comment Share on other sites More sharing options...
75skunkaroo Posted June 5, 2004 Share Posted June 5, 2004 i e-mailed bob,owner of the hatch and brat, he said that he will try and get on here soon to answer questions. i might talk to him on monday.... -mike Link to comment Share on other sites More sharing options...
Dr. RX Posted June 5, 2004 Share Posted June 5, 2004 Zeno, maybe I'll be like those veterans who were going to sue Kerry if he didn't stop showing pictures with them in them without there permission. By the why, Kerry doesn't show those pictures anymore. Yea, Zeno you and I are the stand outs, especially me!!! Link to comment Share on other sites More sharing options...
baccaruda Posted June 6, 2004 Share Posted June 6, 2004 heh. see, i didn't even bother to look at the people in the picture, I just assumed they were all USMB peeps. Link to comment Share on other sites More sharing options...
Adam N.D.J. Posted June 6, 2004 Share Posted June 6, 2004 Is it harder to fit an ER27 into a brat than an EJ22? Just wondering. A bit so indeed. I thought about an Ej for my first choice, but the tranny option limited me, if I had the equipment now that I had way back when, then I coulda come up with an adapter plate, but now that I've got the motor in, I'm VERY happy with it. So when can we expect some pics? I've seen lot of pics of the AUS guys' rigs, but non domestic, would be kewl. Link to comment Share on other sites More sharing options...
Qman Posted June 6, 2004 Share Posted June 6, 2004 I'm sure he'll have one or both of his cars at the show. Link to comment Share on other sites More sharing options...
75skunkaroo Posted June 8, 2004 Share Posted June 8, 2004 i talked to bob today, and he is going to post a list of everything he has done sometime this week. -mike Link to comment Share on other sites More sharing options...
BOBBARCI Posted June 8, 2004 Share Posted June 8, 2004 Hello all, my name is Bob Barci, I own the 82 hatchback in this thread. I am currently working on an 83 Brat that I have installed a 92 EJ22 with 5 speed transmission in from a 95 Legacy. Approximately 3/4" clearance on each side of the engine to the frame/body. The engine is fron a 92 Legacy, the crossmember is from a 84 GL10 turbo 4WD wagon w/power steering. I plumbed the power steering pump from the EJ22 to the 84 ps steering. The engine mount holes in the cross member had to elnogated approximately 3/4" for the engine mount bolts. The front drive shafts are connected to the transmission via double offset joint cups from aLegacy Turbo 91-94. I used a Loyale spi fuel pump, and installed rear disc brakes from a 88 turbo wagon. Wiring harness is from a 92 Legacy being installed by my friend Scott Morgan at his rod shop www.scottstreetrods.com. Some custom work necessary to make it fit so far; lengthen the drive shaft to the differential approx 6 1/2 inches, shorten the 5 speed shift linkage so it is located in the center of the hole in the floor, and an adaptor to connect the 5speed rubber mounts to the stock transmission mount. It doesn't run yet, I'll keep you posted. I plan to have it on the road in about a year. Tha 82 Baru was a 3 year project (1000 hours) and the brat is looking the same. Bob Link to comment Share on other sites More sharing options...
Qman Posted June 8, 2004 Share Posted June 8, 2004 Glad you finally made it Bob. I'm Ken(Qman), I have the big sliver Brat from the last show. Tom told me you were going forward on this project after we talked about it at the show. Sounds like fun(and alot of work). Keep up to speed on this years show in the post WCSS6, and let us know your progress. Ken Link to comment Share on other sites More sharing options...
GeneralDisorder Posted June 8, 2004 Share Posted June 8, 2004 Cool - so how is the SPFI fuel pump hooked up? I'm curious about the hard lines from the pump to the engine bay handling the increase in pressure. Since the Brat was originally carbed, and ran with 1-2 psi, and the SPFI pump is rated at over 40 psi (something like that anyway). I'm going to put the SPFI from an EA82 on my EA81, and will be in a similar situation as you. I had thought to mount the pump in the engine bay and feed it with the carbed pump but maybe that isn't neccesary? Any data you could provide on the strength of the original lines, and their ability to hold this extra pressure? GD Link to comment Share on other sites More sharing options...
MorganM Posted June 8, 2004 Share Posted June 8, 2004 Hey glad to have you on Bob! I know how it goes with 3 year projects Thanks for the first hand info! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now