steve56 Posted May 21, 2016 Share Posted May 21, 2016 My new Snapon Tech Angle torque wrench only goes down to 12.5 ft/lbs. The head gasket torque instructions have a 11 ft/lbs torquing step. Is it okay to torque to 12.5ft/ lbs. when instructions call for 11ft/lbs. Its the final step of instructions before the final 80 to 90 degree then another 80 to 90 degree tightening step. Link to comment Share on other sites More sharing options...
ocei77 Posted May 21, 2016 Share Posted May 21, 2016 (edited) Yes. Any small differences would be accommodated by the final angle turns. In addition those of us who do not have accurate wrenches are never at exactly the specified number and do not have issues. O. Edited May 21, 2016 by ocei77 1 Link to comment Share on other sites More sharing options...
steve56 Posted May 21, 2016 Author Share Posted May 21, 2016 Yes. Any small differences would be accommodated by the final angle turns. In addition those of us who do not have accurate wrenches are never at exactly the specified number and do not have issues. O. Thats what I was hoping was the answer. Thanks for verifing it. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now