Phizinza Posted May 22, 2016 Share Posted May 22, 2016 (edited) Hi old friends. It's been awhile since I posted on here. I'm trying to work out if my customised standard air box on a Weber will fit under the hood of my Brumby/BRAT. The hood is currently not on the car so can anyone take a photo looking across from one fender to the other across the air box? This will give me an idea of mine will actually work. I would add a photo of what I have but this site won't let me upload one off my phone. Edited May 22, 2016 by Phizinza Link to comment Share on other sites More sharing options...
wagonist Posted May 22, 2016 Share Posted May 22, 2016 Get a piece of wood and put it across the strut towers, then from this to the radiator support. Or put the spare tyre back in. If you're below these then you should be good. Why not put the hood back on? It's not that hard 1 Link to comment Share on other sites More sharing options...
Phizinza Posted May 22, 2016 Author Share Posted May 22, 2016 I want to leave it off while I get the wiring and fuel sorted. Mines above the level line but I know for a fact there's a bit more room to play with under the hood I just can't remember how much as it was over a year ago when I started this project. Link to comment Share on other sites More sharing options...
jono Posted May 22, 2016 Share Posted May 22, 2016 well, if you know how high twins sit, I run a custom air intake sitting on the normal part of the carb for air box to sit. It is made of 50mm high, 100 wide and about 280mm long, central and clears the bonnet undersides, not even rub in extreme moments. Link to comment Share on other sites More sharing options...
Uncle Ed Posted May 23, 2016 Share Posted May 23, 2016 Did you modify the stock air cleaner to fit the weber as was done in this other post? http://www.ultimatesubaru.org/forum/topic/142864-1978-subaru-brat-from-death-to-life-and-everything-in-between/page-7?do=findComment&comment=1279470 Ed Link to comment Share on other sites More sharing options...
Phizinza Posted May 23, 2016 Author Share Posted May 23, 2016 Heres what I've got...It's an ea81 airbox on a weber on top a customer manifold bolted to an EJ. Link to comment Share on other sites More sharing options...
Phizinza Posted June 18, 2016 Author Share Posted June 18, 2016 So I put the hood on today and it clears, along with my custom strut tops, lucky! Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted June 18, 2016 Share Posted June 18, 2016 ... It's an ea81 airbox on a weber on top a customer manifold bolted to an EJ. Could you, Please, share Photos + Details regarding such adaptation? Sounds pretty interesting. Kind Regards. Link to comment Share on other sites More sharing options...
Phizinza Posted June 18, 2016 Author Share Posted June 18, 2016 As I'm on my phone and I can't upload images here its probably easier to read this thread here http://offroadingsubarus.com/forum/index.php?topic=1247.0 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now