Rambo Posted June 11, 2016 Share Posted June 11, 2016 Hey guys so I am about to replace the rear cat converter, muffler, and exhaust tips on my loyale, but I want to know whether my cat converter can be salvaged. One mechanic told me that the car converter needed to be replaced because its rusty and is detached from the muffler. I need your opinions. I attached pictures of the worst area of rust, and the part where the cat pipe attaches to the muffler. Do you guys think that I could just put on a new gasket and keep the old cat? Link to comment Share on other sites More sharing options...
Rambo Posted June 11, 2016 Author Share Posted June 11, 2016 Nevermind I'm just going to replace it. However I just ran into anotber problem. The spring bolts are turning but they aren't coming out. Any suggestions for dealing with this? Link to comment Share on other sites More sharing options...
Rambo Posted June 11, 2016 Author Share Posted June 11, 2016 Nevermind I'm just going to replace it. However I just ran into anotber problem. The spring bolts are turning but they aren't coming out. Any suggestions for dealing with this? Link to comment Share on other sites More sharing options...
DaveT Posted June 11, 2016 Share Posted June 11, 2016 (edited) Grinder cut them off. Buy stainless steel hardware at a hardware store to get a similar effect. Use jam nuts to keep them on. My exhaust mod on my Subaru page should have a picture that shows them. 7th picture down on this page: http://www.dynahoedave.co.nf/exhaust.html Edited June 12, 2016 by DaveT Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now