blurat Posted June 27, 2016 Share Posted June 27, 2016 I dont know if this has been asked before but I couldnt see where it was. A 94 position sensor is 250 to 300 bucks. A 95 is 25 dollars. The only difference I see is the 94 has the pigtail attached and the 95 has a socket for a plug. Does anyone know if I can buy the 95 and just solder the wires to it and it will work? Just checking, Thanks Link to comment Share on other sites More sharing options...
Numbchux Posted June 27, 2016 Share Posted June 27, 2016 Yes, although I don't think I would try to solder right onto the connector.I know someone who got the newer style pigtail at a junkyard, and spliced it to the pigtail off his old sensor to make a plug and play jumper harness. Link to comment Share on other sites More sharing options...
blurat Posted June 28, 2016 Author Share Posted June 28, 2016 Terrific. That was my plan. No 90 to 94 subs at the yard today but a later model pigtail to splice might be available. I notice the 94 starts out with 3 wires and ends up with 2, no biggie I assume? Link to comment Share on other sites More sharing options...
Numbchux Posted June 28, 2016 Share Posted June 28, 2016 Yes, 3rd wire is a grounded shield. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now