65stangy Posted July 16, 2016 Share Posted July 16, 2016 So, I know the rear jump seats were not available in the 86 model year (I still want to add them), so what were the narrow vertical rails mounted over the back window for if not for head rests? Link to comment Share on other sites More sharing options...
86BRATMAN Posted July 16, 2016 Share Posted July 16, 2016 I'm not sure of their exact purpose, but I do know they are not mounted in the same spot as the head rests. The head rests were a couple inches towards the outside from those rails. If you look closely at the body you can see where the rail mounts would have been located. On my old 86 someone had riveted the head rest mounts to the body when they installed the jump seats. Link to comment Share on other sites More sharing options...
65stangy Posted July 16, 2016 Author Share Posted July 16, 2016 I noticed that they were not in the same location, and that they do not extend as deep in the bed as head rest rails. I was considering finding some of the wider rails and figuring out a way to use the existing attachment points to mount them. Maybe welding a couple of tabs onto them so I can off set them to match the correct location above the seats. Have you seen anyone try this? Link to comment Share on other sites More sharing options...
86BRATMAN Posted July 17, 2016 Share Posted July 17, 2016 If you find a donor just drill the spot welds for the oem mounts, there are three spot welds on the top ones and two on the bottom. Link to comment Share on other sites More sharing options...
65stangy Posted July 17, 2016 Author Share Posted July 17, 2016 Good idea, I suppose the mounts from any brat generation 1 or 2 would work. I know of a 78 that is at a local wrecking yard, I will see what he will charge me for the mounts. Thank you! Link to comment Share on other sites More sharing options...
86BRATMAN Posted July 17, 2016 Share Posted July 17, 2016 I want to say they are the same, but I'm not positive about that. I'm going to a junkyard that has a couple 2nd gen brats in it one day this week. At least one of them has the mounts and I think the seat rails still intact. If you'd like I can get the parts off of it for you. Also here is a thread with good measurements for the mount brackets and seat belt locations. http://www.ultimatesubaru.org/forum/topic/141474-installing-bed-seats-in-a-1987-brat/ Link to comment Share on other sites More sharing options...
65stangy Posted July 17, 2016 Author Share Posted July 17, 2016 Great info. Thanks! If you would be willing to do that, I would be very much appreciative. No guesswork if they come off of a generation 2. I will pay you any costs and for your time of course. If you happen to spot a rear bumper guard, and a tail gate emblem, those two pieces have been eluding my recent searches as well. Have a great day! Link to comment Share on other sites More sharing options...
86BRATMAN Posted July 17, 2016 Share Posted July 17, 2016 Which emblem are you looking for on the tailgate? There are 3, the BRAT 4wd on the lower left, the Subaru gl on the upper right, and the Subaru logo on the handle. I have a BRAT 4wd badge that needs to be painted because it's pretty faded. I also have a Subaru GL and a Subaru TURBO badge for the upper left but I'm unsure of their condition as it's been a while since I laid eyes on them. I can't swear that any of the brats there have rear bumpers but I'll definitely check them for you. I had a hard time finding those little bumplets when I had my last brat in 07/08. Are you needing the jump seat frame as well? That may be a little harder to remove and ship but I can make it happen if need be. Link to comment Share on other sites More sharing options...
65stangy Posted July 17, 2016 Author Share Posted July 17, 2016 I need the lower left brat 4wd emblem (sounds like you have one). I supposedly have a pair of seats and a frame from a guy near me. I also have a pair of head rests, but no correct rails to put them on. Yeah, the bumper guards seem to be scarce. I really appreciate your help. Link to comment Share on other sites More sharing options...
86BRATMAN Posted July 17, 2016 Share Posted July 17, 2016 I'll try to get out to my building and snap a couple pics of the badge this evening. There may actually be some pics of it on the forum, I had a for sale post a couple years ago with a bunch of ea81 parts and several brat specific things. Link to comment Share on other sites More sharing options...
65stangy Posted July 17, 2016 Author Share Posted July 17, 2016 Awesome. I will look forward to it. Again, Thanks. Link to comment Share on other sites More sharing options...
86BRATMAN Posted July 18, 2016 Share Posted July 18, 2016 Sorry I didn't get this posted yesterday, been a hectic couple weeks. It's looking like Wednesday will be when I get to the junkyard, if nothing else goes wrong, so I'll update you again afterwards. Link to comment Share on other sites More sharing options...
65stangy Posted July 18, 2016 Author Share Posted July 18, 2016 great emblem! just what i need. How much would you like for it? Or we can wait to see what you come up with at the junk yard and settle up a fair price for all. Thanks so much for your help, I will have to pay it forward. Link to comment Share on other sites More sharing options...
65stangy Posted July 20, 2016 Author Share Posted July 20, 2016 I just got word from someone who is sending me some head rest rails, but no mounting brackets. If you have already pulled the ones from the junk yard, I will still take them, but if not, you could leave them for someone else. Link to comment Share on other sites More sharing options...
86BRATMAN Posted July 21, 2016 Share Posted July 21, 2016 I was only able to get the upper mounts, the lower ones are made from thin bent sheet metal with a net welded on the back side. And all 3 brats that were there had those brackets either too rusty or too bent to be of any use. I'll get some pics of the brackets I got for you tomorrow evening, I got called into work this evening to cover for someone who was sick and have to go back to open up in the morning. Story of managing a restaurant Link to comment Share on other sites More sharing options...
65stangy Posted July 21, 2016 Author Share Posted July 21, 2016 Okay, Thanks. I am headed out of town in the morning and will be back on Sunday. Link to comment Share on other sites More sharing options...
65stangy Posted July 26, 2016 Author Share Posted July 26, 2016 Sending you a private message now that the site is back up... Link to comment Share on other sites More sharing options...
65stangy Posted August 4, 2016 Author Share Posted August 4, 2016 Hey 86bratman, I know life gets busy, but I could really use those mounting brackets if you are still willing to hook me up... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now