iriejedi Posted August 10, 2016 Share Posted August 10, 2016 (edited) Having a hard time finding the threads which discuss how to circumvent getting a check engine light when one has done a 2.5L to 2.2L converstion on a 98 Outback. The donor engine came from a 95 Legacy which had a manual transmission and therefore no stock EGR setup. My 98 Outback has an automatic transmission so I doubt swapping the computers will do any good. I thought I read a topic on this last year. Edited August 10, 2016 by iriejedi Link to comment Share on other sites More sharing options...
wtdash Posted August 10, 2016 Share Posted August 10, 2016 Hi, REview THIS POST. Basically, you need a '95-'98 SOHC (ONLY) EGR-equipped intake manifold (IM). GL, Td Link to comment Share on other sites More sharing options...
dp213 Posted August 11, 2016 Share Posted August 11, 2016 I have done a similar work around as the above link on a few cars and it works perfect. The only thing I did different is that I used the brass egr tube and cut it about 2" after the first bend from the intake and turned the tube to point at the passenger side then just put a piece of hose on that with a hose clamp Link to comment Share on other sites More sharing options...
iriejedi Posted August 11, 2016 Author Share Posted August 11, 2016 Awesome thanks guys! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now